Hello all,
I need a "short" (3m -> ~10ft) thin and flexible cable for my wifi card, a cisco aironet 352 with a man-welded pigtail connector
.
On this forum I found various suggestions, but all cables are 5mm thick and none of them is more flexible than a RG58.
I found that the Belden H-155 has a very low loss (0.3 db/m, 0.1 db/ft) at 2.4GHz but is very thick (5.1mm), do you have a suggestion for an alternative? And wich connector should I use on it?
Thanx a lot to everyone