Quote:
Originally posted by stargo
1. Get the files flash.exe and flash.ini from Intersil:
http://www.intersil.com/rnwscripts/c...p?p_faqid=1992
2. Boot to real dos mode
3. run
flash -5v -pd card.pda
(this dumps the pda of your card)
4. edit card.pda and change the line '6 109 XX2 1 2b 0 0' to
'6 109 3 3 2b 0 0' (replace only the two values after 109)
If you have an original orinoco card, then XX is nonexistant, else the two XX are your card-manufacturer-code.)
5. run
flash -5v -p card.pda
(this flashes the content of card.pda to your card)
Now your card has a new PDA but will still behave like a silver card. To really make it to a gold card, you simply have to flash the latest firmware to the card again (with the windows-update utility).
After removing and reinserting the card, The Client-Manager version information should show that you have a lucent gold card and that enhanced wep encryption is allowed. [/b]
|
I tried this method out, but got an get error message:
Writing pda
rid read error. offeset busy bit never cleared
rid fd01 read error
failed
error encountered
When i where trying to flash the card, strangley enough it still works..
So doesnt realy seem like it flashed anything