jwjody

Ok...I have an Orinoco card whose drivers were patched last night. At one time this morning I had got Kismet to run but it wouldn't find my hope AP.

I exited out of Kismet and restarted services so I could search for solutions, but now when I try to start kismet again I get errors.

Server options: none
Client options: none
Starting server...
Waiting for server to finish starting before startuing UI...
Will drop privs to jody (500)
No enable sources specified, all sources will be enabled.
Source 0 (orinocosource): Using pcap to capture packets from eth0
Source 0 (orinocosource): Attempting to enter monitor mode.
Enabling monitor mode for an orinoco card on eth0 channel 6
Capture child 6412 (orinocosource): Capturing packets from libpcap device eth0
Source orinocosource: Created child capture process 6412
Dropped privs to jody (500)
Enabling channel hopping.
Disabling channel splitting.
Allowing clients to fetch WEP keys.
WARNING: Disabling GPS logging.
Logging networks to Kismet-Oct-04-2003-1.network
Logging networks in CSV format to Kismet-Oct-04-2003-1.csv
Logging networks in XML format to Kismet-Oct-04-2003-1.xml
Logging cryptographically weak packets to Kismet-Oct-04-2003-1.weak
Logging cisco product information to Kismet-Oct-04-2003-1.cisco
Logging data to Kismet-Oct-04-2003-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Reading AP manufacturer data and defaults from /usr/local/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/local/etc/client_manuf
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 3.0.1 (Kismet)
Logging data networks CSV XML weak cisco
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Registering builtin client/server protocols...
Registering requested alerts...
Registering builtin timer events...
Enabling packet source 0 (orinocosource)...
Gathering packets...
sh: line 1: iwpriv: command not found
Shutting down source 0 (orinocosource)...
Didn't detect any networks, unlinking network list.
Didn't detect any networks, unlinking CSV network list.
Didn't detect any networks, unlinking XML network list.
Didn't detect any Cisco Discovery Packets, unlinking cisco dump
Capture child 6412 asked to die, shutting down.
Didn't capture any packets, unlinking dump file
Didn't see any weak encryption packets, unlinking weak file
Waiting for capture child 6412 to terminate...
Kismet exiting.
Starting UI...
FATAL: Could not connect to localhost:2501.
Client exited, terminating...
Done. Run kismet_unmonitor or eject and re-insert your card (or restart your
pcmcia services) to return your card to normal operation.

Also when I type in iwpriv or lsmod to see setting or even ifconfig I get 'command not found'

If more information is needed let me know what I need to post. But some help would be greatly appreciated.

Thanks,
J

__________________
If women had run the world, we would still be in caves if we had even survived. They wouldn't have let men have stupid gadgets like fire and the wheel.