reefland

I can't get MiniStumbler 0.4.0 working on this device. The "Socket SDIO WLAN" program sees the adapter, I can connect to my home wireless network with no issues.

Driver: 3.00.04.2.0056.03
NIC Firmware: 1.07.06.00

(Both latest on Socket's web site)

Steps I've tried:

1) Soft reset the device
2) Insert Socket SD 802.11b Card
3) Get solid link light.
4) Tap "Socket SDIO WLAN" to confirm driver see's the card.
5) Tap "MiniStumbler"
6) Status line says "Ready", " ", "GPS OFF", "0" (I have no GPS).
7) Says "The specified" next to Ready.
8) Says "This function" next to Ready.

How can I get the full text of the status?

9) Nothing appears in main panel.
10) MiniStumbler is very slow to respond to any selection.
11) MiniStumbler's "about" shows:

Prism2 card support by Marius Milner
Card Version: 0.00
Driver: 3.0.4
Station Firmware: 0.00
MAC Address: [address shown matches the card's sticker]

12) Close MiniStumbler
13) Tap "Socket SDIO WLAN" to check driver it shows:

"Unable to connect to the Wireless NetCard. Is it inserted?"

I have to soft reset the device to get it working again.