Cards that reportedly WORK with NetStumbler 0.4

Patje · 04-21-2004

The new released Netstumbler 0.4.0 and the 8470-WD are working together. Just did a 2 hours wardriving without any problem...

Patje

Whacko · 04-21-2004

dont know exactly where to put this, so ill put it here.

It seems the RTL8180L chip is working better with NS 0.4 (it had random crashes etc.) i havent done a wardrive with it yet, but it sure gives a lot of more info about my router. NS used to crash when i had "hide ssid beacon frame" broadcasting on, but its okay now. It also displays my router's vendor which i didnt know cos its rebranded.

only one minor thing the SSID name has L9D appended to it. so it shows:
"MyRoutersSSIDnameL9D" for instance. I dont know if this is a router thing or the card, so i will let you know tomorrow, when i take a little warPublicTransportationTrip (

) to school. to see if it does it with all AP's it finds.

hope this is useful info. And keep up the good work Marius!

ok, i took my laptop to school today. It didnt crash anymore, and the "L9D" thing seems to be only with my router.. so imo i thinks its working fine

Marcust99 · 04-21-2004

I am very happy to report that my Linksys G card works perfectly with the new NetStumbler .4 version. MAJOR kudos to the author for getting this version out to work with the most popular cards!!

Marcus

F`Nar · 04-21-2004

My laptop's internal WLAN NIC is finally not only supported, but supported well.

Anyone contemplating buying a HP zx5000 series notbook can at least be assured that Netstumbler will work on it.

Thank you, marius, not only for this, but for the display fix. Now I can finally watch my network get clobbered and have a chance of finding out what's clobbering it.

Now to see how ministumbler works on the iPAQ 55 with a Navman sleeve.

odiferous · 04-21-2004

System: Inspiron 8600, Pentium M 1.4
Wireless: Intel 2100 mPCI, Orinoco Gold, Buffalo WLI-CB-G54

0.3.30: Intel crashed efficiently, Orinoco solid, Buffalo not tested

0.4: Intel misreports but does not crash, Orinoco and Buffalo solid

Marius, you do excellent work. Thanks for the new version. Elegant code, and well documented and supported by overly polite, eloquent people in these forums. I've only had to look up a few of the words I've found. ;~}

Xeon · 04-21-2004

It works with my BinatoneBroadband WL1000 card - which has a D-Link 650 chipset (I'm using the D-Link drivers).

Thanks again, great tool now I can use it

litehedded · 04-21-2004

sweet! it works with my intersil prism a/b/g card!
thanks man!

Local · 04-22-2004

Thank you, thank you for the new version.

My Dell Truemobile 1400 a/b/g mini-pci card works fine now, no more crashing every ten seconds. Thank you again.

SMC EliteConnect 2532W-B gave me problems one and a while but not anymore. This card is available at CompUSA and has two external RP-MMCX antenna connectors. Awsome card, lots of power, wouldn't trade it for anything.

SMC EliteConnect at COMPUSA

I also have a Buffalo Airstation WLI-CB-G54A b/g card I'll try today and let ya know.

Whacko · 04-22-2004

thought i'd post it here too:

www.Canyon-tech.com 's CN-WF502 card works too.
its a Realtek rtl8180L based card.

martinlesmana · 04-22-2004

Hi,

Used 3com airconnect : 3crwe737a-fr ... works fine with NS 0.4 so far....
BTW since I couldnt find an mmcx connector at all for the card (dont even think of a pigtail).... built my own froM parts of original antenna

joecool

clanggedin · 04-22-2004

WPC11 802.11b card works. Im even using ver.3 firmware (old).

surrealism · 04-22-2004

Netgear WG511 and WG511T both kicking strong.

Stealthy_C · 04-22-2004

Intel Pro/Wireless LAN 2100 Centrino

On Dell Inspiron 8600

Tripleplay905 · 04-22-2004

My WCI-CB-G54A card works very well!

netnet · 04-22-2004

Acer 290 Travelmate Centrino Intel 2200B/G WinXPHome is working fine with 0.4!

Thnx

04-21-2004	#1 (permalink)
Patje Registered Member Join Date: Apr 2004 Posts: 1	Cards that reportedly WORK with NetStumbler 0.4 The new released Netstumbler 0.4.0 and the 8470-WD are working together. Just did a 2 hours wardriving without any problem... Patje

04-21-2004	#2 (permalink)
Whacko Registered Member Join Date: Mar 2004 Location: The Netherlands Posts: 37	rtl8180L dont know exactly where to put this, so ill put it here. It seems the RTL8180L chip is working better with NS 0.4 (it had random crashes etc.) i havent done a wardrive with it yet, but it sure gives a lot of more info about my router. NS used to crash when i had "hide ssid beacon frame" broadcasting on, but its okay now. It also displays my router's vendor which i didnt know cos its rebranded. only one minor thing the SSID name has L9D appended to it. so it shows: "MyRoutersSSIDnameL9D" for instance. I dont know if this is a router thing or the card, so i will let you know tomorrow, when i take a little warPublicTransportationTrip () to school. to see if it does it with all AP's it finds. hope this is useful info. And keep up the good work Marius! ok, i took my laptop to school today. It didnt crash anymore, and the "L9D" thing seems to be only with my router.. so imo i thinks its working fine Last edited by G8tK33per : 04-22-2004 at 06:57 AM. Reason: typo :)

04-21-2004	#3 (permalink)
Marcust99 Registered Member Join Date: Apr 2004 Posts: 2	Linksys WPC54G With 0.4 Success I am very happy to report that my Linksys G card works perfectly with the new NetStumbler .4 version. MAJOR kudos to the author for getting this version out to work with the most popular cards!! Marcus Last edited by G8tK33per : 04-21-2004 at 03:48 PM.

04-21-2004	#4 (permalink)
F`Nar Registered Member Join Date: Apr 2004 Location: Long Island, NY, USA Posts: 2	New "Card" - Broadcom 54g - HP Laptop My laptop's internal WLAN NIC is finally not only supported, but supported well. Anyone contemplating buying a HP zx5000 series notbook can at least be assured that Netstumbler will work on it. Thank you, marius, not only for this, but for the display fix. Now I can finally watch my network get clobbered and have a chance of finding out what's clobbering it. Now to see how ministumbler works on the iPAQ 55 with a Navman sleeve.

04-21-2004	#5 (permalink)
odiferous Registered Member Join Date: Apr 2004 Posts: 5	Intel 2100 mPCI, Orinoco Gold, Buffalo WLI-CB-G54 System: Inspiron 8600, Pentium M 1.4 Wireless: Intel 2100 mPCI, Orinoco Gold, Buffalo WLI-CB-G54 0.3.30: Intel crashed efficiently, Orinoco solid, Buffalo not tested 0.4: Intel misreports but does not crash, Orinoco and Buffalo solid Marius, you do excellent work. Thanks for the new version. Elegant code, and well documented and supported by overly polite, eloquent people in these forums. I've only had to look up a few of the words I've found. ;~} Last edited by Thorn : 04-22-2004 at 06:01 AM. Reason: Merge/rename

04-21-2004	#6 (permalink)
Xeon Registered Member Join Date: Apr 2004 Posts: 1	It works with my BinatoneBroadband WL1000 card - which has a D-Link 650 chipset (I'm using the D-Link drivers). Thanks again, great tool now I can use it

04-21-2004	#7 (permalink)
litehedded P.I.M.P. Productions Join Date: Dec 2003 Posts: 110	sweet! it works with my intersil prism a/b/g card! thanks man! __________________ -fhgwghads

04-22-2004	#8 (permalink)
Local Registered Member Join Date: Apr 2004 Posts: 1	Thank you, thank you for the new version. My Dell Truemobile 1400 a/b/g mini-pci card works fine now, no more crashing every ten seconds. Thank you again. SMC EliteConnect 2532W-B gave me problems one and a while but not anymore. This card is available at CompUSA and has two external RP-MMCX antenna connectors. Awsome card, lots of power, wouldn't trade it for anything. SMC EliteConnect at COMPUSA I also have a Buffalo Airstation WLI-CB-G54A b/g card I'll try today and let ya know. __________________ "My mother never saw the irony in calling me a son-of-a bitch." - Jack Nicholson

04-22-2004	#9 (permalink)
Whacko Registered Member Join Date: Mar 2004 Location: The Netherlands Posts: 37	thought i'd post it here too: www.Canyon-tech.com 's CN-WF502 card works too. its a Realtek rtl8180L based card.

04-22-2004	#10 (permalink)
martinlesmana Registered Member Join Date: Apr 2004 Posts: 3	this card works Hi, Used 3com airconnect : 3crwe737a-fr ... works fine with NS 0.4 so far.... BTW since I couldnt find an mmcx connector at all for the card (dont even think of a pigtail).... built my own froM parts of original antenna joecool

04-22-2004	#11 (permalink)
clanggedin Registered Member Join Date: Apr 2004 Posts: 3	WPC11 802.11b card works. Im even using ver.3 firmware (old).

04-22-2004	#12 (permalink)
surrealism Registered Member Join Date: Apr 2004 Posts: 57	Netgear WG511 and WG511T both kicking strong.

04-22-2004	#13 (permalink)
Stealthy_C Registered Member Join Date: Feb 2004 Posts: 4	Intel Pro/Wireless LAN 2100 Centrino On Dell Inspiron 8600

04-22-2004	#14 (permalink)
Tripleplay905 Registered Member Join Date: Apr 2004 Posts: 20	My WCI-CB-G54A card works very well!

04-22-2004	#15 (permalink)
netnet Registered Member Join Date: Mar 2004 Posts: 2	Acer 290 Travelmate Centrino Intel 2200B/G WinXPHome Acer 290 Travelmate Centrino Intel 2200B/G WinXPHome is working fine with 0.4! Thnx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode