![]() |
|
|||||||
| Register | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Posts: n/a
|
Netstumbler and Windows XP problems
Hello
I am running Netstumbler with windows XP using an Orinoco gold card flashed to the latest version (7.0, I believe). Everytime I try and run netstumbler, a small window at the bottom says "Need to run the object." Not sure what this means but I can not get stumbler to run. I tried to running stumbler with the card unplugged then plugging it in after NS is running. It works briefly and then locks up. Any ideas, I have scanned the pages and seen there are a lot of problems with the orinoco cards. Thanks johnmac |
|
|
|
#4 (permalink) |
|
Posts: n/a
|
Have tried NetStumbler using XP (on a Sony Vaio) with the Orinoco Bronze (Turbo), Silver, and Gold and they all work great.
All are flashed to the latest firmware and I have some cards flashed to 4.52 (last firm to support Promiscuous mode) and they work as well... NO idea... -Mc |
|
|
|
#5 (permalink) |
|
Posts: n/a
|
I also had this problem (XP, Silver, non updated firmware) and my first thought after reading some posts here was to remove/delete the Orinoco Client Manager.
This did seem to help. I have been stumbling my office bldg. (with active AP's) for about 40 minutes and no more "Run Object" error. 1st Step: Go mobile and see if it still holds up. 2nd Step: Re-install Client Manager and verify this is the problem. Perhaps a conflict or incorrect settings (by me?) within the Client Manager. Good Luck. |
|