AiroDump Drivers

blcArmadillo · 01-31-2005

Hey I recently downloaded AiroPeek and AirCrack. I found a realtek driver on the WildPackets website for my D-Link Air DWL-650 card. I succesfully installed the driver and my card works fine. However when I open AiroPeek it says that my card is not using a WildPackets driver. Does anyone have a clue of where I could find a compatible driver or any ideas of something I may be doing wrong? If so I would greatly appreciate the info. Thanks.

streaker69 · 01-31-2005

Quote:

Originally Posted by blcArmadillo

Hey I recently downloaded AiroPeek and AirCrack. I found a realtek driver on the WildPackets website for my D-Link Air DWL-650 card. I succesfully installed the driver and my card works fine. However when I open AiroPeek it says that my card is not using a WildPackets driver. Does anyone have a clue of where I could find a compatible driver or any ideas of something I may be doing wrong? If so I would greatly appreciate the info. Thanks.

Is it the DWL-650 or 650+?

blcArmadillo · 01-31-2005

DWL-650 is the one I have streaker.

grcore · 01-31-2005

When you check your network card properties, under configure and on the Driver tab does it list the provider as WildPackets?

if not then the driver is not installed.

g

blcArmadillo · 01-31-2005

grcore I went and checked to see if it listed WildPackets but it dident. It said the provider was D-Link. This leads me to believe that instead of using the driver I told it to it reverted to a diffrent driver. Anyone have any ideas? Could it be that the driver I downloaded from WildPackets site was just a driver provided by D-Link?

grcore · 01-31-2005

Quote:

Originally Posted by blcArmadillo

grcore I went and checked to see if it listed WildPackets but it dident. It said the provider was D-Link. This leads me to believe that instead of using the driver I told it to it reverted to a diffrent driver. Anyone have any ideas? Could it be that the driver I downloaded from WildPackets site was just a driver provided by D-Link?

If you installed it properly, it would have said WildPackets. Follow the instructions until you get it installed right.

g

blcArmadillo · 01-31-2005

I just tried again (this is my sixth time). I was however given the same error message. I have included a cropped screenshot of the message (grayscale because original filesize was to large for forum). Any suggestions are appreciated.

grcore · 01-31-2005

According the the Wildpackets site, The DLink DWL650 rev. M- version 3 only, Version P1 is not supported.

What version do you have?

g

someguy88 · 04-05-2006

I have a DWL-650 rev. P card, and I receive the same error.

I found this this page, where it specifies that the card has a Prism3 SSF chipset.

Since both Aircrack, and Airsnort rely on Airopeek, it looks like we either have to wait until WildPackets releases a supported driver or invest in a new card. I did read somewhere else in these forums that WildPackets has been working with various hardware vendors to support more chipsets. However there was no timeframe, and the list had no specifics. I'm going to make a trip over to ebay after this, but there is still a chance that this card may be supported someday. I have not found any technical documentation that suggests this card is unable to get the job done (aside from having no drivers).

Hope this helps, and good luck.

Dutch · 04-05-2006

Zoombie alert..
Do NOT revive threads where the last post was made more than a year ago.

Dutch

01-31-2005	#1 (permalink)
blcArmadillo Registered Member Join Date: Jan 2005 Posts: 4	AiroDump Drivers Hey I recently downloaded AiroPeek and AirCrack. I found a realtek driver on the WildPackets website for my D-Link Air DWL-650 card. I succesfully installed the driver and my card works fine. However when I open AiroPeek it says that my card is not using a WildPackets driver. Does anyone have a clue of where I could find a compatible driver or any ideas of something I may be doing wrong? If so I would greatly appreciate the info. Thanks.

01-31-2005	#5 (permalink)
blcArmadillo Registered Member Join Date: Jan 2005 Posts: 4	grcore I went and checked to see if it listed WildPackets but it dident. It said the provider was D-Link. This leads me to believe that instead of using the driver I told it to it reverted to a diffrent driver. Anyone have any ideas? Could it be that the driver I downloaded from WildPackets site was just a driver provided by D-Link? Last edited by blcArmadillo : 01-31-2005 at 05:17 PM.

04-05-2006	#10 (permalink)
Dutch Humourless EuroMod. Join Date: Mar 2004 Location: City of Mermaids, Denmark Posts: 6,819	Zoombie alert.. Do NOT revive threads where the last post was made more than a year ago. Dutch __________________ All your answers are belong to Google. SEARCH DAMMIT! Warning. Warning. Low C8H10N4O2 level detected. Operator halted....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-31-2005	#3 (permalink)
blcArmadillo Registered Member Join Date: Jan 2005 Posts: 4	DWL-650 is the one I have streaker.

01-31-2005	#4 (permalink)
grcore Member at large Join Date: Aug 2004 Posts: 121	When you check your network card properties, under configure and on the Driver tab does it list the provider as WildPackets? if not then the driver is not installed. g

01-31-2005	#8 (permalink)
grcore Member at large Join Date: Aug 2004 Posts: 121	According the the Wildpackets site, The DLink DWL650 rev. M- version 3 only, Version P1 is not supported. What version do you have? g

04-05-2006	#9 (permalink)
someguy88 Registered Member Join Date: Apr 2006 Posts: 1	I have a DWL-650 rev. P card, and I receive the same error. I found this this page, where it specifies that the card has a Prism3 SSF chipset. Since both Aircrack, and Airsnort rely on Airopeek, it looks like we either have to wait until WildPackets releases a supported driver or invest in a new card. I did read somewhere else in these forums that WildPackets has been working with various hardware vendors to support more chipsets. However there was no timeframe, and the list had no specifics. I'm going to make a trip over to ebay after this, but there is still a chance that this card may be supported someday. I have not found any technical documentation that suggests this card is unable to get the job done (aside from having no drivers). Hope this helps, and good luck.