Internet Explorer Prob

Kaldes · 09-24-2003

After attempting to use the trusty ol' search function I came across nothing.
Ok this is the problem I have a AP at home (personal) and one at my college (For Us To Use). Everytime I try to run Internet Explorer my 56k connection (Netzero) runs and asks me to connect. Now I cannot access Home or neither college.

This is where I think,but nothing successful yet. Internet Explorer>Tools>Internet Options>Connections. I tried to tell not to dial, took it off Default, LAN settings to Automatically detect settings, and also dial only when a network connection is not present. Still nothing, any suggestions?

NinjaPablo · 09-25-2003

If you aren't using dialup at all, try deleting any Dialup Networking connections you have. Otherwise, click the Setup button in that screen and tell it to use a broadband connection and see if that helps.

JimEther · 09-25-2003

Hey There,

Change "Dial when there is no network..." to "Never Dial..." and make sure you are connected to the AP via your client software before you try to open I.E.... also, if needed, run 'winipcfg' and 'renew' your wireless device.

Hope this helps.

09-24-2003	#1 (permalink)
Kaldes Registered Member Join Date: Sep 2003 Location: The Sunshine State Posts: 4	Internet Explorer Prob After attempting to use the trusty ol' search function I came across nothing. Ok this is the problem I have a AP at home (personal) and one at my college (For Us To Use). Everytime I try to run Internet Explorer my 56k connection (Netzero) runs and asks me to connect. Now I cannot access Home or neither college. This is where I think,but nothing successful yet. Internet Explorer>Tools>Internet Options>Connections. I tried to tell not to dial, took it off Default, LAN settings to Automatically detect settings, and also dial only when a network connection is not present. Still nothing, any suggestions?

09-25-2003	#3 (permalink)
JimEther Registered Member Join Date: Sep 2003 Location: South East Michigan Posts: 65	Make a change Hey There, Change "Dial when there is no network..." to "Never Dial..." and make sure you are connected to the AP via your client software before you try to open I.E.... also, if needed, run 'winipcfg' and 'renew' your wireless device. Hope this helps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-25-2003	#2 (permalink)
NinjaPablo Unvisibual Join Date: Feb 2003 Location: West Michigan Posts: 91	If you aren't using dialup at all, try deleting any Dialup Networking connections you have. Otherwise, click the Setup button in that screen and tell it to use a broadband connection and see if that helps.