StumbVerter problem

tapper451 · 08-13-2002

I just started trying to import into Mapoint through StunbVerter, but each time I try I get the following error:

62 Input past end of file

Anyone else seen this ?

TheWatcher · 08-13-2002

Quote:

Originally posted by tapper451
I just started trying to import into Mapoint through StunbVerter, but each time I try I get the following error:

62 Input past end of file

Anyone else seen this ?

tapper451,
Using StumbVerter is straight forward. First, export your NS file to summary format. Second, open StumbVerter, create map, for North America or Europe. Then import summary file.

The StumbVerter will do all the rest.

By the way, I'm assumming that your data with GPS record.

If you want me to test your data, send me your NS file to thewatcher@wardriving.info email.

Regards.

blackwave · 08-13-2002

Quote:

Originally posted by tapper451
62 Input past end of file

With the older version of StumbVerter it is possible that you may have a blank SSID that will not be handled well.

Open up your summary file and replace your blanks SSID's with something like (%BLANKSSID%), the newest version handles it fine, so there is no need to this.

tapper451 · 08-13-2002

Thanks Watcher,

It was a simple issue of wrong export format and an entry with a blank SSID. The readme suggested wi-scan export, but that would not populate the AP list, I tried summary as suggested and got an error. I then removed 2 entries that had blank SSId's (something I had seen referenced on the board) and it worked after a long delay. The delay isn't supprising, I'm running on an old 266 that is my wardriving laptop.

Thanks for the help !

Tapper

TheWatcher · 08-13-2002

Quote:

Originally posted by tapper451
Thanks Watcher,

It was a simple issue of wrong export format and an entry with a blank SSID. The readme suggested wi-scan export, but that would not populate the AP list, I tried summary as suggested and got an error. I then removed 2 entries that had blank SSId's (something I had seen referenced on the board) and it worked after a long delay. The delay isn't supprising, I'm running on an old 266 that is my wardriving laptop.

Thanks for the help !

Tapper

With the blank SSID, put something else like "test" so you won't lost the data.

tapper451 · 08-13-2002

I've got about 800 in the NS1 I'm mapping so I'm not worried about loosing one or two. Thanks for the suggestion though, I'll use that for the next map run I do. I sent you the .NS1 in e-mail if you want to play with it.

Tapper

TheWatcher · 08-13-2002

Quote:

Originally posted by tapper451
I've got about 800 in the NS1 I'm mapping so I'm not worried about loosing one or two. Thanks for the suggestion though, I'll use that for the next map run I do. I sent you the .NS1 in e-mail if you want to play with it.

Tapper

tapper45,

I've corrected your NS file and uploaded the image here...
http://www.airsnort.info/live/module...view_album.php

Btw, you can add image here as long as you logged in.

Thanks man.

Carnager · 08-16-2002

I discovered an error with Stumbverter:

Initially I had very few AP's show up in the resulting maps, but after correcting the no-ssid points, there were still several points left that were not listed.
These places do have GPS locations and SSID's.

Once I select one of these points from the list on the left, an error shows up in a foreign language (italian or spanish or something)

The error that shows up is the following:

Quote:

Error '91' en tiempo de ejecución :

La variable de tipo Object o la variable de bloque With no está establecida

Does anyone know what it means (translate) and if possible try to solve it?..

TheWatcher · 08-16-2002

Quote:

Originally posted by Carnager
I discovered an error with Stumbverter:

Initially I had very few AP's show up in the resulting maps, but after correcting the no-ssid points, there were still several points left that were not listed.
These places do have GPS locations and SSID's.

Once I select one of these points from the list on the left, an error shows up in a foreign language (italian or spanish or something)

The error that shows up is the following:

Does anyone know what it means (translate) and if possible try to solve it?..

Carnager,
If your data is combined with different date of stumbling, I suggest that you remove all date excepts the first date in the header. Make sure no blank SSID, if you have put something any text. The file is tab delimited.

Send me your data if you want me to check it.

Cheers,
TheWatcher.

blackwave · 08-16-2002

Quote:

Originally posted by Carnager
I discovered an error with Stumbverter:
...
Does anyone know what it means (translate) and if possible try to solve it?..

I ran into this exact problem (though English) back a while ago you can check here for the thread and how to fix the issue:
NetStumbler.com Forums > NetStumbler Forums > Help > StumbVerter crashing when Files merged
http://forums.netstumbler.com/showth...&threadid=1760

Here is the translation:

---------------------------
StumbVerter
---------------------------
Run-time error '91':

Object variable or With block variable not set
---------------------------
OK
---------------------------

Carnager · 08-16-2002

Quote:

Originally posted by TheWatcher

* If your data is combined with different date of stumbling, I suggest that you remove all date excepts the first date in the header.
* Make sure no blank SSID, if you have put something any text. The file is tab delimited.

Did both things and it didn't help. I sent you the file in it's current state.
Try for example the accesspoints named:
wiresmallingerland
contactweg
sarapub

Carnager · 08-16-2002

Darnit, just as I scrolled trough my test file once more, I found out the problem...

Next to no SSID entries, it also doesn't accept entries with only one (and maybe more) space character...

Argh..

Oh well, good to know it now anyway, sorry for the trouble.. Anyway, it now works..

I hope the next version of stumbverter will correct these problems by itself, would be a great function instead of going trough the file by hand.. More even when it starts growing very big..

Anyway, thanks for your help!..

TheWatcher · 08-16-2002

Quote:

Originally posted by Carnager
Darnit, just as I scrolled trough my test file once more, I found out the problem...

Next to no SSID entries, it also doesn't accept entries with only one (and maybe more) space character...

Argh..

Oh well, good to know it now anyway, sorry for the trouble.. Anyway, it now works..

I hope the next version of stumbverter will correct these problems by itself, would be a great function instead of going trough the file by hand.. More even when it starts growing very big..

Anyway, thanks for your help!..

Good to know everything working fine now. Remember TAB spacing only.

blackwave · 08-16-2002

Quote:

Originally posted by Carnager
I hope the next version of stumbverter will correct these problems by itself, would be a great function instead of going trough the file by hand.. More even when it starts growing very big..

The next version of StumbVerter kicks ass. Check out a screen shot

All hail Mother!

TheWatcher · 08-16-2002

Quote:

Originally posted by blackwave

The next version of StumbVerter kicks ass. Check out a screen shot All hail Mother!

This is cool blackwave, when is the release of new version?

08-13-2002	#1 (permalink)
tapper451 Desert Stumbler Join Date: Apr 2002 Location: Tempe,Az Posts: 32	StumbVerter problem I just started trying to import into Mapoint through StunbVerter, but each time I try I get the following error: 62 Input past end of file Anyone else seen this ?

08-13-2002	#4 (permalink)
tapper451 Desert Stumbler Join Date: Apr 2002 Location: Tempe,Az Posts: 32	Resolved Thanks Watcher, It was a simple issue of wrong export format and an entry with a blank SSID. The readme suggested wi-scan export, but that would not populate the AP list, I tried summary as suggested and got an error. I then removed 2 entries that had blank SSId's (something I had seen referenced on the board) and it worked after a long delay. The delay isn't supprising, I'm running on an old 266 that is my wardriving laptop. Thanks for the help ! Tapper

08-13-2002	#6 (permalink)
tapper451 Desert Stumbler Join Date: Apr 2002 Location: Tempe,Az Posts: 32	blank SSID I've got about 800 in the NS1 I'm mapping so I'm not worried about loosing one or two. Thanks for the suggestion though, I'll use that for the next map run I do. I sent you the .NS1 in e-mail if you want to play with it. Tapper

08-16-2002	#12 (permalink)
Carnager European Stumble DataBase Join Date: Jul 2002 Location: The Netherlands (EU) Posts: 104	Darnit, just as I scrolled trough my test file once more, I found out the problem... Next to no SSID entries, it also doesn't accept entries with only one (and maybe more) space character... Argh.. Oh well, good to know it now anyway, sorry for the trouble.. Anyway, it now works.. I hope the next version of stumbverter will correct these problems by itself, would be a great function instead of going trough the file by hand.. More even when it starts growing very big.. Anyway, thanks for your help!.. __________________ Carnager Founder of SDV SDV Anime: http://www.sdvanime.com SDV Eurobeat: http://www.eurobeat.nl SDV W-lan: http://wlan.sdvanime.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode