![]() |
|
|||||||
| Register | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Registered Member
Join Date: May 2006
Posts: 1
|
Compaq WL110 card aireplay not generating enough IVs...
I think I am definately doing something wrong here
I have compaq WL110 I firmware upgraded to 8.72 orinoco gold i think. then I started up Linux (auditor) then. cd /etc/pcmcia cp ./config /tmp rm config ln –s /tmp/config I opened CONFIG to patch the card with orinoco_cs card “Compaq WL100 11 Mbps Wireless Adapter” manfid 0×0138, 0×0002 bind “orinoco_cs” and change it to card “Compaq WL110 11 Mbps Wireless Adapter” manfid 0×0156, 0×0002 bind “orinoco_cs” then, /etc/init.d/pcmcia restart To set up the monitor mode... ifconfig eth2 up iwpriv eth2 monitor 2 (channel) so far so good, kismet works, aireplay works, airodump everything works. The problem I face is this. I did airodump eth2 cap <router mac address> then aireplay eth2 -x 512 -b <router mac address> -s <client mac address> -d <ff:ff:ff:ff:ff:ff> -n 68 -m 68 so i caught one packet, and pressed Y it just generates ONLY 1 IV and it doesnt do anything. please help. |
|
|
|
|
|
#2 (permalink) | |
|
Psychic Amish Stumbler
Join Date: Jul 2004
Location: Virginville, BlueBall, Bird In Hand, Intercourse, Paradise, PA
Posts: 11,839
|
Quote:
__________________
"One of these days, I'm going to cut you to pieces." If you're offended by this post, please feel free to report it to one of the many helpful moderators of this forum. Thank you. |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|