Problems with Void11 (From Auditor CD) - Page 2

Fr0zt · 02-13-2006

alright, going to go try out the syntax I linked to above, will edit once I find out if it works.

theprez98 · 02-13-2006

Quote:

Originally Posted by Fr0zt

alright, going to go try out the syntax I linked to above, will edit once I find out if it works.

Good luck. I'm off to bed, the night crew will have to take over for me. If no one else responds, post your results, but I won't be able to get to it until sometime tomorrow.

Fr0zt · 02-13-2006

"airmon.sh: command not found" Guess there's something wrong from the beginning. You know what's wrong?

Edit: thanks for all your help theprez98, g'night

trueblu8 · 05-25-2006

Hey Fr0zt, did you ever have any luck with this? I also have an atheros card and am having the same problems you were. I'm using that Tom's Networking guide as well. I'm getting frustrated here and just ordered a dwl-122 which is supposed to have the prism2 chipset. Maybe I'll be able to run void11 with that. Yeah, I can run Kismet, can run airdump, aircrack, and aireplay, even though I don't know if it'll ever find an arp, but I cannot run a void11. And without that I think I'm screwed 'cause I'll never be able to capture an arp with aireplay to generate any traffic. Now I read here that they were talking about running some kind of deauth attacks with aireplay. But what exactly are the commands you have to enter to be able to do that? And would we be able to do them with an atheros?

Barry · 05-25-2006

Uhh, dude, I think that was his last post on the forums.

trueblu8 · 05-25-2006

LOL! holy cow, I guess I was talking to someone that I would never get an answer from then, hahahah. I wonder what happened to him, maybe he gave up. This kinda stuff is very time consuming and can be frustrating sometimes. Anyways, I did some searching and found this:

iwpriv ath0 mode 2

aireplay -1 0 -e [valid ssid] -a [real AP mac] -h 0:1:2:3:4:5 ath0

With the latest madwifi CVS, you need to run sysctl to enable the ath0raw

interface (no patch required) and use ath0raw instead of ath0.

Thank you for the quick response. I've done my rtfm in the README and found the:

sysctl -w dev.ath0.rawdev=1

Which said it will create the ath0raw device. When I run 'iwconfig' I see it and

it says "ath0raw no wireless extensions". But the documentation now says that I

need to run:

ifconfig ath0raw up

And iwconfig still says no wireless extensions, but thats ok because ifconfig

shows its up.
And to finish it off, I ran:

aireplay -1 0 -e [ssid] -a [valid ap mac] -h 0:1:2:3:4:5 ath0raw

And it worked!!!

08:56:25 Sending Authentication Request
08:56:25 Authentication successful
08:56:25 Sending Association Request
08:56:25 Association successful :-)

Thank you Devine.

I'm gonna try this and see what happens...

Barry · 05-25-2006

See RTFM actually works. Damn, It's late, Streaker's probably going to get out of bed in an hour or two to go to work!! Gotta go sleep now.

streaker69 · 05-25-2006

Quote:

Originally Posted by Barry

See RTFM actually works. Damn, It's late, Streaker's probably going to get out of bed in an hour or two to go to work!! Gotta go sleep now.

7:11am, I'm at work, did you need something?

Barry · 05-25-2006

Quote:

Originally Posted by streaker69

7:11am, I'm at work, did you need something?

You're late.

trueblu8 · 05-25-2006

Damn, none of this stuff seems to be working. Can anyone tell me how to deauth with atheros??

trueblu8 · 05-25-2006

just a basic command, 'cause I've tried just about everything but I just can't it to run...

Dutch · 05-25-2006

Quote:

Originally Posted by trueblu8

just a basic command, 'cause I've tried just about everything but I just can't it to run...

As you wish : man aireplay<enter>

Now take it to the auditor livecd support site, since that's where it belongs, if you can't get something in that distro working.

Dutch

05-25-2006	#20 (permalink)
Barry Managing the iTards. Join Date: Dec 2002 Location: Ohio Posts: 5,383	Uhh, dude, I think that was his last post on the forums. __________________ Atheism is a non-prophet organization.

05-25-2006	#22 (permalink)
Barry Managing the iTards. Join Date: Dec 2002 Location: Ohio Posts: 5,383	See RTFM actually works. Damn, It's late, Streaker's probably going to get out of bed in an hour or two to go to work!! Gotta go sleep now. __________________ Atheism is a non-prophet organization.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-13-2006	#16 (permalink)
Fr0zt Registered Member Join Date: Nov 2004 Posts: 9	alright, going to go try out the syntax I linked to above, will edit once I find out if it works.

02-13-2006	#18 (permalink)
Fr0zt Registered Member Join Date: Nov 2004 Posts: 9	"airmon.sh: command not found" Guess there's something wrong from the beginning. You know what's wrong? Edit: thanks for all your help theprez98, g'night

05-25-2006	#19 (permalink)
trueblu8 Registered Member Join Date: May 2006 Location: Chicago, IL Posts: 21	Hey Fr0zt, did you ever have any luck with this? I also have an atheros card and am having the same problems you were. I'm using that Tom's Networking guide as well. I'm getting frustrated here and just ordered a dwl-122 which is supposed to have the prism2 chipset. Maybe I'll be able to run void11 with that. Yeah, I can run Kismet, can run airdump, aircrack, and aireplay, even though I don't know if it'll ever find an arp, but I cannot run a void11. And without that I think I'm screwed 'cause I'll never be able to capture an arp with aireplay to generate any traffic. Now I read here that they were talking about running some kind of deauth attacks with aireplay. But what exactly are the commands you have to enter to be able to do that? And would we be able to do them with an atheros?

05-25-2006	#21 (permalink)
trueblu8 Registered Member Join Date: May 2006 Location: Chicago, IL Posts: 21	LOL! holy cow, I guess I was talking to someone that I would never get an answer from then, hahahah. I wonder what happened to him, maybe he gave up. This kinda stuff is very time consuming and can be frustrating sometimes. Anyways, I did some searching and found this: iwpriv ath0 mode 2 aireplay -1 0 -e [valid ssid] -a [real AP mac] -h 0:1:2:3:4:5 ath0 With the latest madwifi CVS, you need to run sysctl to enable the ath0raw interface (no patch required) and use ath0raw instead of ath0. Thank you for the quick response. I've done my rtfm in the README and found the: sysctl -w dev.ath0.rawdev=1 Which said it will create the ath0raw device. When I run 'iwconfig' I see it and it says "ath0raw no wireless extensions". But the documentation now says that I need to run: ifconfig ath0raw up And iwconfig still says no wireless extensions, but thats ok because ifconfig shows its up. And to finish it off, I ran: aireplay -1 0 -e [ssid] -a [valid ap mac] -h 0:1:2:3:4:5 ath0raw And it worked!!! 08:56:25 Sending Authentication Request 08:56:25 Authentication successful 08:56:25 Sending Association Request 08:56:25 Association successful :-) Thank you Devine. I'm gonna try this and see what happens...

05-25-2006	#25 (permalink)
trueblu8 Registered Member Join Date: May 2006 Location: Chicago, IL Posts: 21	Damn, none of this stuff seems to be working. Can anyone tell me how to deauth with atheros??

05-25-2006	#26 (permalink)
trueblu8 Registered Member Join Date: May 2006 Location: Chicago, IL Posts: 21	just a basic command, 'cause I've tried just about everything but I just can't it to run...