help

fodger · 10-01-2004

I have just bought a new HP hx4700 ipaq and have tried to install ministumbler but i see a message saying that I have no wireless and i have a config error.
can anyone tell me if my ipaq will run this program please.
paul

nono · 10-01-2004

Quote:

Originally Posted by fodger

I have just bought a new HP hx4700 ipaq and have tried to install ministumbler but i see a message saying that I have no wireless and i have a config error.
can anyone tell me if my ipaq will run this program please.
paul

Did you turn the wireless on first?

fodger · 10-01-2004

yes i can connect to my router ok but not get the mini stumbler working

nono · 10-01-2004

Quote:

Originally Posted by fodger

yes i can connect to my router ok but not get the mini stumbler working

This PPC is relatively new product. It seems to be using some chipset from Texus Instruments, I guess it is not supported yet. You can try WiFiFoFum http://www.wififofum.org/ which I think it will work as it supports 4350, which is also using a TI chipset. No promises though.

fodger · 10-02-2004

Quote:

Originally Posted by nono

This PPC is relatively new product. It seems to be using some chipset from Texus Instruments, I guess it is not supported yet. You can try WiFiFoFum http://www.wififofum.org/ which I think it will work as it supports 4350, which is also using a TI chipset. No promises though.

Got it working, many thanks for you help.

Paul

True · 11-09-2004

Since I will also have this PDA in about a week, until (and hopefully when) MiniStumbler supports this wireless chipset and I am stuck with WiFiFoFum (although the radar thing looks like a neat gimmick), I will be writing a web-based converter for its logs to native .NS1, as well as other NS1 tools I started working on. I'll make a post when it is complete.

fodger · 11-10-2004

Great news cant wait to get my hands on it.....

Paul

True · 11-10-2004

I have the NS1 processing complete, just need to finish a couple of converters from an in source back to NS1, and then write the filter support.

Basically I need to finish writing the part so I can easily filter out certain entries, such as APs within certain coordinates, or entries with only a certain amount of signal, or strip out all of the gps data except for a few of the highest signal data, etc... and then I will write the converter for WiFiFoFum <-> NS1, and maybe other formats if I end up using them. Also need some WiFiFoFum logs.

I will probably post a WIP link sometime soon, because as I stated, the actual NS1 processing part is complete and works (other than two last things, channelbits and xor for flags for a userfriendly table). It is written in PHP and when it is complete, it will be released under some open source license. I am hoping for it to be mostly a native .NS1 tool for everyone, and a converter and filter for me.

Again, I will let you know. I am sure to get it done not long after I get my hx4700.

SlickWilly · 11-29-2004

Any updates of this working on an HX4700?

10-01-2004	#1 (permalink)
fodger Registered Member Join Date: Nov 2003 Location: Ireland Posts: 4	help I have just bought a new HP hx4700 ipaq and have tried to install ministumbler but i see a message saying that I have no wireless and i have a config error. can anyone tell me if my ipaq will run this program please. paul __________________ paul

10-01-2004	#3 (permalink)
fodger Registered Member Join Date: Nov 2003 Location: Ireland Posts: 4	help yes i can connect to my router ok but not get the mini stumbler working __________________ paul

11-10-2004	#7 (permalink)
fodger Registered Member Join Date: Nov 2003 Location: Ireland Posts: 4	Great news cant wait to get my hands on it..... Paul __________________ paul

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-09-2004	#6 (permalink)
True Registered Member Join Date: Feb 2004 Posts: 4	Since I will also have this PDA in about a week, until (and hopefully when) MiniStumbler supports this wireless chipset and I am stuck with WiFiFoFum (although the radar thing looks like a neat gimmick), I will be writing a web-based converter for its logs to native .NS1, as well as other NS1 tools I started working on. I'll make a post when it is complete.

11-10-2004	#8 (permalink)
True Registered Member Join Date: Feb 2004 Posts: 4	I have the NS1 processing complete, just need to finish a couple of converters from an in source back to NS1, and then write the filter support. Basically I need to finish writing the part so I can easily filter out certain entries, such as APs within certain coordinates, or entries with only a certain amount of signal, or strip out all of the gps data except for a few of the highest signal data, etc... and then I will write the converter for WiFiFoFum <-> NS1, and maybe other formats if I end up using them. Also need some WiFiFoFum logs. I will probably post a WIP link sometime soon, because as I stated, the actual NS1 processing part is complete and works (other than two last things, channelbits and xor for flags for a userfriendly table). It is written in PHP and when it is complete, it will be released under some open source license. I am hoping for it to be mostly a native .NS1 tool for everyone, and a converter and filter for me. Again, I will let you know. I am sure to get it done not long after I get my hx4700.

11-29-2004	#9 (permalink)
SlickWilly Registered Member Join Date: Nov 2004 Posts: 2	Any updates of this working on an HX4700?