The N connector in the cantenna,

tantatium · 09-21-2004

When is maded my cantenna, i made it like on the http://www.turnpoint.net/wireless/has.html way ,

now it has a copper in the middle , but the outside of the N connector

needs also an connection not ?

so i mean The + is connected to the copper

and the - .... ?? ( must it make a connection to the case of the can.??

Barry · 09-21-2004

If I understand you correctly, you made a cantenna. You used a soup can, which is conductive so you have a connection with physical contact. You don't need to solder it if it is bolted on.

09-21-2004	#1 (permalink)
tantatium Registered Member Join Date: Sep 2004 Posts: 12	The N connector in the cantenna, When is maded my cantenna, i made it like on the http://www.turnpoint.net/wireless/has.html way , now it has a copper in the middle , but the outside of the N connector needs also an connection not ? so i mean The + is connected to the copper and the - .... ?? ( must it make a connection to the case of the can.??

09-21-2004	#2 (permalink)
Barry Managing the iTards. Join Date: Dec 2002 Location: Ohio Posts: 5,367	If I understand you correctly, you made a cantenna. You used a soup can, which is conductive so you have a connection with physical contact. You don't need to solder it if it is bolted on. __________________ Atheism is a non-prophet organization.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode