Cards that reportedly WORK w/MiniStumbler 0.4 - Page 3

NetGuy.ca · 05-09-2004

Works pretty well with my Toshiba e740 (integrated 802.11b).

A couple of quirks I noticed (which may not be specific to the e740)... even with the autoconfigure button selected, I still had to manually change my wireless SSID to "ANY" in order to pick up AP's other than my own.

Also, manually setting the scan speed above the midpoint causes some erratic detections when you set the scripting to "No Scripting". At the fastest scan speed with "No Scripting", AP's appear and disappear on every scan.

G8tK33per · 05-09-2004

Quote:

Originally Posted by NetGuy.ca

I still had to manually change my wireless SSID to "ANY" in order to pick up AP's other than my own.

You don't say...now there's a freakin' revelation.

djmason9 · 05-15-2004

I have a HP 2215 and a Dell TrueMobile 1180 card. I am using MiniStumbler 4.0 and I am using the Orinoco Drivers. It took me awhile to find these drivers but you can get them here. http://www.noodles4all.com/WiFi/WLCE3074.zip
If you get that card do NOT install the drivers that come with it. You will have to hard boot your PDA to get them off. And they suck anyway. Use the Orinoco drivers they are MUCH better in every way.
Here are some instructions on how to do it

1. Remove Dell TrueMobile CF card from your PPC
2. Uninstall the Dell TrueMobile driver (good luck you may have to hard boot so back up first!)
3. Install orinoco driver onto your PocketPC
4. Insert the CF card into your PPC
5. When prompted with Unrecognized Card, enter WLLUC46.DLL

It works great. I hope this helps others get started easier.

AF0015 · 05-20-2004

did you get your card to work right after installing the updated drivers?

micropitt · 05-22-2004

Ministumbler is working great on my IPaq 3650 (CE 3.0/PPC 2000/PPC2002). I'm using the PC Card expansion pack with build in battery and the Alvarion BreezeNet PC-DS.11b card. The driver i'm using is the original Alvarion CE 3.0 driver which is available on Alvarions website. I installed the driver, poped in the card and it worked right away. Battery life is about 24 hours if careful with backlight usage.
I know that the original Orinoco driver also should work with some changes but i didn't fool with it. Alvarions original driver works fine for me.

djmason9 · 05-27-2004

yeah i just updated my rom and did the reinstall again and it works perfect

docaps · 05-27-2004

I have had no luck with Ministumbler 0.4 using the below config. but it works fine with a netgear MA701 card

Hardware Revision : 6.3
Firmware version: 0.100.5.39
Driver Version: 3.2.4.130
Module Release Date: 02.09.05

Has anyone got any ideas as it has been posted that it works with an earlier driver version.

GuardianZX9 · 05-29-2004

My 2215 works with the Ambicom WL-1100C-CF card with the Intersil Prism driver set, couldn't get it to work with the Ambisom driver.

G

Bananaskin · 05-30-2004

Greets to all

Confirming that my IPAQ 5455 running Pocket PC 2002 version 1.11.XX (06 Jun 03) D/L'd from the HP site does work. No updates were applied in the form of firmware or drivers for the wlan. Asset Viewer information is as follows:

Hardware Revision : 6.3
Firmware Version : 0.100.5.39
Driver Version : 3.2.2.84
Software Version : 4.0.1.36
Module Release Date : 02.09.05

fordem · 06-05-2004

Came across a post on the Aximsite that says the Dell Axim X30 with the integrated wireless works - I'm not certain if this is different hardware or different drivers - the X30 does ship with WM2003SE.

Apparently the X30 uses the Dell TM1210 so I guess the different hardware is why it works.

PlaggyJohn · 06-06-2004

Ministumbler is OK on my old Cassiopeia E115 (CE 3.0) & Linksys WCF12

phantagom · 06-10-2004

I have a IPAQ 5450 and ministumbler works (sort of)

OS: WM2003

My Asset Viewer for WLAN says:
Hardware Version: 6.3
Firmware Version: 0.100.5.39
Driver Version: 3.2.2.96
Module release date: 02.09.05

But ministumbler doesn't detect as many AP's then wififofum. Wififofum detects up to 3 times more AP's then Ministumbler.

G8tK33per · 06-10-2004

Quote:

Originally Posted by phantagom

I have a IPAQ 5450 and ministumbler works (sort of)

OS: WM2003

My Asset Viewer for WLAN says:
Hardware Version: 6.3
Firmware Version: 0.100.5.39
Driver Version: 3.2.2.96
Module release date: 02.09.05

But ministumbler doesn't detect as many AP's then wififofum. Wififofum detects up to 3 times more AP's then Ministumbler.

This is not a competition, either it works or not...just like the title of the thread states. If you're unhappy with the program, delete and move on.

GordonNL · 07-04-2004

hi there.. this works great with my h2210+Dell truemobile 1180...
but is there a way to set mij wifi card ON or OF? so i can always let my card in it?

SolarW · 07-08-2004

Work fine on my HP Jornada720 (HPC2000 ARM) with Orinoco Silver (Lucent technologies)

05-15-2004	#33 (permalink)
djmason9 Registered Member Join Date: May 2004 Posts: 2	Dell TrueMobile 1180 Works I have a HP 2215 and a Dell TrueMobile 1180 card. I am using MiniStumbler 4.0 and I am using the Orinoco Drivers. It took me awhile to find these drivers but you can get them here. http://www.noodles4all.com/WiFi/WLCE3074.zip If you get that card do NOT install the drivers that come with it. You will have to hard boot your PDA to get them off. And they suck anyway. Use the Orinoco drivers they are MUCH better in every way. Here are some instructions on how to do it 1. Remove Dell TrueMobile CF card from your PPC 2. Uninstall the Dell TrueMobile driver (good luck you may have to hard boot so back up first!) 3. Install orinoco driver onto your PocketPC 4. Insert the CF card into your PPC 5. When prompted with Unrecognized Card, enter WLLUC46.DLL It works great. I hope this helps others get started easier. Last edited by djmason9 : 05-15-2004 at 08:58 AM.

05-20-2004	#34 (permalink)
AF0015 Registered Member Join Date: Apr 2004 Posts: 1	new drivers did you get your card to work right after installing the updated drivers?

05-22-2004	#35 (permalink)
micropitt Registered Member Join Date: Apr 2002 Location: Maryland, USA Posts: 23	IPaq 3650 Ministumbler is working great on my IPaq 3650 (CE 3.0/PPC 2000/PPC2002). I'm using the PC Card expansion pack with build in battery and the Alvarion BreezeNet PC-DS.11b card. The driver i'm using is the original Alvarion CE 3.0 driver which is available on Alvarions website. I installed the driver, poped in the card and it worked right away. Battery life is about 24 hours if careful with backlight usage. I know that the original Orinoco driver also should work with some changes but i didn't fool with it. Alvarions original driver works fine for me. Last edited by micropitt : 05-27-2004 at 05:07 AM.

05-27-2004	#36 (permalink)
djmason9 Registered Member Join Date: May 2004 Posts: 2	true mobile yeah i just updated my rom and did the reinstall again and it works perfect

05-27-2004	#37 (permalink)
docaps Registered Member Join Date: Jul 2003 Location: Melbourne, Australia Posts: 20	RE: Ipaq 5550 I have had no luck with Ministumbler 0.4 using the below config. but it works fine with a netgear MA701 card Hardware Revision : 6.3 Firmware version: 0.100.5.39 Driver Version: 3.2.4.130 Module Release Date: 02.09.05 Has anyone got any ideas as it has been posted that it works with an earlier driver version.

05-09-2004	#31 (permalink)
NetGuy.ca Registered Member Join Date: Mar 2004 Posts: 3	Works pretty well with my Toshiba e740 (integrated 802.11b). A couple of quirks I noticed (which may not be specific to the e740)... even with the autoconfigure button selected, I still had to manually change my wireless SSID to "ANY" in order to pick up AP's other than my own. Also, manually setting the scan speed above the midpoint causes some erratic detections when you set the scripting to "No Scripting". At the fastest scan speed with "No Scripting", AP's appear and disappear on every scan.

05-29-2004	#38 (permalink)
GuardianZX9 Registered Member Join Date: Jun 2002 Posts: 6	My 2215 works with the Ambicom WL-1100C-CF card with the Intersil Prism driver set, couldn't get it to work with the Ambisom driver. G

05-30-2004	#39 (permalink)
Bananaskin Registered Member Join Date: May 2004 Posts: 2	IPAQ 5455 Internal WIFI Does Work Greets to all Confirming that my IPAQ 5455 running Pocket PC 2002 version 1.11.XX (06 Jun 03) D/L'd from the HP site does work. No updates were applied in the form of firmware or drivers for the wlan. Asset Viewer information is as follows: Hardware Revision : 6.3 Firmware Version : 0.100.5.39 Driver Version : 3.2.2.84 Software Version : 4.0.1.36 Module Release Date : 02.09.05

06-05-2004	#40 (permalink)
fordem Tropical Stumbler Join Date: Apr 2002 Posts: 575	Came across a post on the Aximsite that says the Dell Axim X30 with the integrated wireless works - I'm not certain if this is different hardware or different drivers - the X30 does ship with WM2003SE. Apparently the X30 uses the Dell TM1210 so I guess the different hardware is why it works. Last edited by fordem : 06-08-2004 at 03:56 PM.

06-06-2004	#41 (permalink)
PlaggyJohn Registered Member Join Date: Jun 2004 Posts: 1	Ministumbler is OK on my old Cassiopeia E115 (CE 3.0) & Linksys WCF12

06-10-2004	#42 (permalink)
phantagom Registered Member Join Date: Jun 2004 Posts: 1	I have a IPAQ 5450 and ministumbler works (sort of) OS: WM2003 My Asset Viewer for WLAN says: Hardware Version: 6.3 Firmware Version: 0.100.5.39 Driver Version: 3.2.2.96 Module release date: 02.09.05 But ministumbler doesn't detect as many AP's then wififofum. Wififofum detects up to 3 times more AP's then Ministumbler.

07-04-2004	#44 (permalink)
GordonNL Registered Member Join Date: Jul 2004 Posts: 1	hi there.. this works great with my h2210+Dell truemobile 1180... but is there a way to set mij wifi card ON or OF? so i can always let my card in it?

07-08-2004	#45 (permalink)
SolarW Registered Member Join Date: Jul 2004 Posts: 4	Work fine on my HP Jornada720 (HPC2000 ARM) with Orinoco Silver (Lucent technologies)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode