![]() |
|
|||||||
| Register | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Registered Member
Join Date: Apr 2002
Posts: 15
|
Ipaq, pharos iGPS & problems...
I have an IPAQ 3630 with a pharos iGPS.
I connected the gps today, and did not know what com port to set within the ministumbler, so I just tried a few. On com3, the application hangs and I have to forcibly stop the task. When I start ministumbler.exe again, it remembers the configured com setting, and I'm kind of stuck. Do I have to remove ministumbler.exe and put a new one in there, or could I do some registry changes? Thanks in advance. |
|
|
|
|
|
#2 (permalink) |
|
Registered Member
Join Date: Apr 2002
Posts: 15
|
Never mind. I posted a bit too early. iGPS connects to com1 now, so I'll just have to play around a bit more.
Additionally, copying the ministumbler.exe to a new file, running that - solved the configuration thing. Com3 is probably a different port.. IR or something, that could be the reason it was hanging. |
|
|
|