Mini S. Displays 'Linksys' only

03-17-2002

I am running ministubler on an Ipaq 3600 using a Sony (Orinoco silver) card. It seems to be a nice combination that yields dozens and dozens of hits in my Metro Boston area. I noticed that after the 1st or 2nd time out, the program now only identifies AP's as 'linksys' even though I know that they are named otherwise. Truly the last several hundred new AP's I've found are named 'linksys.'

Any ideas out there as to what's causing this?

03-17-2002

make sure the SSID is set to: 'any' (no quotes) and not 'linksys'.

03-25-2002

Make sure that under "Options > Reconfigure Card Automatically" has a check next to it.

It sounds like you were associated with a Linksys prior to Stumbling.

DSLBiker

03-17-2002	#1 (permalink)
Posts: n/a	Mini S. Displays 'Linksys' only I am running ministubler on an Ipaq 3600 using a Sony (Orinoco silver) card. It seems to be a nice combination that yields dozens and dozens of hits in my Metro Boston area. I noticed that after the 1st or 2nd time out, the program now only identifies AP's as 'linksys' even though I know that they are named otherwise. Truly the last several hundred new AP's I've found are named 'linksys.' Any ideas out there as to what's causing this?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-17-2002	#2 (permalink)
Posts: n/a	make sure the SSID is set to: 'any' (no quotes) and not 'linksys'.

03-25-2002	#3 (permalink)
Posts: n/a	Make sure that under "Options > Reconfigure Card Automatically" has a check next to it. It sounds like you were associated with a Linksys prior to Stumbling. DSLBiker