mini stumbler is cool but not for me

02-16-2002

THanks for this great tool.

its unlucky that i can't use it. as i have ce 2.12 so iam now going to have to go out and upgrade to 3.0 to use this great bit of equipment.
thanks again for all your hard work.

02-16-2002

did you tryed it?

i had an Casio E-15 and now a E-125. i found some programs that was written for CE 3.0 but they also run on my E-15 (it had 2.11).

02-17-2002

I'm in the same boat. I have a Casio E-100 running Windows CE (2.11). But apparantly, nobody is supporting this platform anymore. Including Casio.

I've been trying to find a wireless CF card that runs on Windows CE, but they all seem to claim support only for "Pocket PC 3.0" or newer.

I was planning to buy and try a CF card anyway. But I haven't found a CF card based on the Hermes chipset required for Ministumbler.

02-17-2002

I just tested Ministumbler on the Casio E-100 and couldn't get it to run.

I get the error:
MiniStumbler.exe - Can't find Ministumbler. (or one of its components). Make sure the path and filename are correct and that all required libraries are available.

Of course, I clicked right on it.. so Win CE 2.11 must be missing a library crucial for MiniStum.

Also, I don't have a CF card installed (see above post.) I would have expect a "missing card" error, according to the FAQ.

So it's possible the MIPS R4000 Win CE 2.11 is a bust.

PS> I used to be a QA manager, so forgive the excessive detail. (I was also an engineer, so no bashing please.)

02-17-2002

it´s wrong! not all cards does only support pocketPC. take my tekram for example.

check my side and you will find some CF cards, the bromax and z-coms (also the reseller) does support CE 2.11.

http://www.freenetworks.de.vu/wlan-cards/cf-wlan.html
or this one (not my side)
http://www.cewindows.net/peripherals/cfwirelesslan.htm

the main problem is that this cards are prism 2 and prism 2.5 so netstumbler doesn´t support them :-(

i hope that marius make the prism 2.x support asap.

@marius you did a good job :-)

02-17-2002

If you have troubble with your CF WLAN card try this
http://www.pocketpccity.com/boards/Casio-E100/messages/26143.html

02-16-2002	#1 (permalink)
Posts: n/a	mini stumbler is cool but not for me THanks for this great tool. its unlucky that i can't use it. as i have ce 2.12 so iam now going to have to go out and upgrade to 3.0 to use this great bit of equipment. thanks again for all your hard work.

02-17-2002	#3 (permalink)
Posts: n/a	Windows CE pre-3.0 I'm in the same boat. I have a Casio E-100 running Windows CE (2.11). But apparantly, nobody is supporting this platform anymore. Including Casio. I've been trying to find a wireless CF card that runs on Windows CE, but they all seem to claim support only for "Pocket PC 3.0" or newer. I was planning to buy and try a CF card anyway. But I haven't found a CF card based on the Hermes chipset required for Ministumbler.

02-17-2002	#4 (permalink)
Posts: n/a	Followup test I just tested Ministumbler on the Casio E-100 and couldn't get it to run. I get the error: MiniStumbler.exe - Can't find Ministumbler. (or one of its components). Make sure the path and filename are correct and that all required libraries are available. Of course, I clicked right on it.. so Win CE 2.11 must be missing a library crucial for MiniStum. Also, I don't have a CF card installed (see above post.) I would have expect a "missing card" error, according to the FAQ. So it's possible the MIPS R4000 Win CE 2.11 is a bust. PS> I used to be a QA manager, so forgive the excessive detail. (I was also an engineer, so no bashing please.)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-16-2002	#2 (permalink)
Posts: n/a	did you tryed it? i had an Casio E-15 and now a E-125. i found some programs that was written for CE 3.0 but they also run on my E-15 (it had 2.11).

02-17-2002	#5 (permalink)
Posts: n/a	it´s wrong! not all cards does only support pocketPC. take my tekram for example. check my side and you will find some CF cards, the bromax and z-coms (also the reseller) does support CE 2.11. http://www.freenetworks.de.vu/wlan-cards/cf-wlan.html or this one (not my side) http://www.cewindows.net/peripherals/cfwirelesslan.htm the main problem is that this cards are prism 2 and prism 2.5 so netstumbler doesn´t support them :-( i hope that marius make the prism 2.x support asap. @marius you did a good job :-)

02-17-2002	#6 (permalink)
Posts: n/a	If you have troubble with your CF WLAN card try this http://www.pocketpccity.com/boards/Casio-E100/messages/26143.html