NetStumbler.org Forums

Go Back   NetStumbler.org Forums > WiFi Forums > Hardware
Reload this Page Adding an antenna to a Linksys WPC54GS
Register Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old 08-07-2008   #1 (permalink)
mojo-chan
Registered Member
 
Join Date: Jun 2008
Posts: 4
Adding an antenna to a Linksys WPC54GS
I have been looking for a way to add an antenna to a WPC54GS for a while now. I got it cheap (£3!) and it has a well supported Broadcom chipset. I have had good results with it under Backtrack 3, even if the TX power is only 15mW.

Here is a high res pic of the board: http://www.bagpipes.net/files/front-linksys54g.jpg

Sorry for being a n00b but where do I need to solder on to? I found an old thread (wpc54g version2 external antenna w/ tnc jack) which says connect the pin to the end of C155 (top left corner of the image) but checking with a multimeter this appears to be connected to the GND points nearby. Maybe my multimeter isn't good enough to spot the very low value capacitor in between? In that case presumably I should just solder shield to one of these ground points...
mojo-chan is offline   Reply With Quote
Old 08-07-2008   #2 (permalink)
streaker69
Psychic Amish Stumbler
 
streaker69's Avatar
 
Join Date: Jul 2004
Location: Virginville, BlueBall, Bird In Hand, Intercourse, Paradise, PA
Posts: 11,791
Quote:
Originally Posted by mojo-chan View Post
I have been looking for a way to add an antenna to a WPC54GS for a while now. I got it cheap (£3!) and it has a well supported Broadcom chipset. I have had good results with it under Backtrack 3, even if the TX power is only 15mW.

Here is a high res pic of the board: http://www.bagpipes.net/files/front-linksys54g.jpg

Sorry for being a n00b but where do I need to solder on to? I found an old thread (wpc54g version2 external antenna w/ tnc jack) which says connect the pin to the end of C155 (top left corner of the image) but checking with a multimeter this appears to be connected to the GND points nearby. Maybe my multimeter isn't good enough to spot the very low value capacitor in between? In that case presumably I should just solder shield to one of these ground points...
Which side of the Cap did you measure from. It would appear onside of the Cap is connected to ground and the other is connected to the antenna.
__________________
"One of these days, I'm going to cut you to pieces."

If you're offended by this post, please feel free to report it to one of the many helpful moderators of this forum.

Thank you.
streaker69 is online now   Reply With Quote
Old 08-07-2008   #3 (permalink)
mojo-chan
Registered Member
 
Join Date: Jun 2008
Posts: 4
Both sides appear connected with my DMM, but it wasn't an expensive one...
mojo-chan is offline   Reply With Quote
Old 08-07-2008   #4 (permalink)
Thorn
Did you do the math?
 
Thorn's Avatar
 
Join Date: Apr 2002
Location: Villa Straylight
Posts: 10,083
Attach it past C155, all the way out to the point marked "U2".

And for what it is worth, the Broadcom chip is NOT supported. It's one of the chipsets that falls into the "mostly works under NDIS" area.
__________________
Thorn
"I'm The Doctor. I'm a Time Lord. I am from the planet Gallifrey in the constellation Kasterborous. I'm 903 years old and I am the man who is going to save your lives and all 6 billion people on the planet below... You got a problem with that?"
Thorn is offline   Reply With Quote
Old 08-07-2008   #5 (permalink)
mojo-chan
Registered Member
 
Join Date: Jun 2008
Posts: 4
Okay, thanks a lot Thorn. What about the shield, just do that to GND?

You are right about Broadcom support, although it does work very well with other tools like AirCrack.
mojo-chan is offline   Reply With Quote
Old 08-07-2008   #6 (permalink)
Thorn
Did you do the math?
 
Thorn's Avatar
 
Join Date: Apr 2002
Location: Villa Straylight
Posts: 10,083
Quote:
Originally Posted by mojo-chan View Post
Okay, thanks a lot Thorn. What about the shield, just do that to GND?
Yes, shield to GND.
__________________
Thorn
"I'm The Doctor. I'm a Time Lord. I am from the planet Gallifrey in the constellation Kasterborous. I'm 903 years old and I am the man who is going to save your lives and all 6 billion people on the planet below... You got a problem with that?"
Thorn is offline   Reply With Quote
Old 08-07-2008   #7 (permalink)
mojo-chan
Registered Member
 
Join Date: Jun 2008
Posts: 4
Thanks, I'll report back when I have given it a go!
mojo-chan is offline   Reply With Quote
Reply

« AP across multiple channels | Hack the October publication of Esquire Magazine »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Google
 
Web NetStumbler.org

All times are GMT -7. The time now is 06:44 AM.

Contact Us - NetStumbler.org - NetStumbler.com - Online Backup - Archive - Top

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 ©2007, Crawlability, Inc.


All messages express the views of the author and are for entertainment purposes only. Netstumbler.org cannot be held responsible for the authenticity of the content or the actions of its members. By using this site and its services, you warrant that you will not post any messages that are discriminating, obscene, hateful, threatening, or otherwise violates any laws and you release Netstumbler.org from any future claims of any kind whatsoever including, but not limited to, addiction and loss of productivity. All forum messages, private messages and any other content are properties of Netstumbler.org. Even if publicly available, personal or copyrighted information are not to be posted without the consent of the owner. Distribution of licensed and copyrighted materials in any way not endorsed by the copyright owner is strictly prohibited. You may not use this site and its resources to spam other sites or individuals or perform any action that violates any law. Items sold or bought in the For Sale forum are sold as is and no warranty or insurance of any kind is provided. Netstumbler.org cannot be held responsible for the outcome of any transactions and no warranty of any kind is provided, either express or implied. Vulgar words are not allowed in the subject lines ; they may be used in the message body in any forum. The Administrator, Super Moderators and Moderators of Netstumbler.org have the right to remove, edit, move or close any thread for any reason and to reveal your identity and other known information in the event of a complaint or legal action arising from any message posted by you.