Internal Antenna Connections for Linksys router

bringerofwar · 02-23-2004

Im interested in the connector type that connects the board to the outside of the box.

The connectors are 90-degree smallish with a pin in the middle and a gold finish on the outside.

Thanks

bringerofwar · 02-23-2004

also it looks like theres room on the pcb to put an ide looking connector, but it has room for 50 pins.

the traces seem to go to the wireless chip and the realtek chip

Can this be used to do anything cool?

Thorn · 02-23-2004

If you post the Model and Version number along with pictures you'll get a better response. Linksys makes at least two different wireless routers, and they are different internally.

bringerofwar · 02-24-2004

Yeah, i can see that i should have done that

So, Linksys BEFW11S4 V3

http://www.villagephotos.com/pubbrow...elected=794249

02-23-2004	#1 (permalink)
bringerofwar Registered Member Join Date: Feb 2004 Posts: 9	Internal Antenna Connections for Linksys router Im interested in the connector type that connects the board to the outside of the box. The connectors are 90-degree smallish with a pin in the middle and a gold finish on the outside. Thanks

02-23-2004	#3 (permalink)
Thorn Did you do the math? Join Date: Apr 2002 Location: Villa Straylight Posts: 10,359	If you post the Model and Version number along with pictures you'll get a better response. Linksys makes at least two different wireless routers, and they are different internally. __________________ Thorn "Read Altas Shrugged. Compare it to today. Repeat as necessary"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-23-2004	#2 (permalink)
bringerofwar Registered Member Join Date: Feb 2004 Posts: 9	also it looks like theres room on the pcb to put an ide looking connector, but it has room for 50 pins. the traces seem to go to the wireless chip and the realtek chip Can this be used to do anything cool?

02-24-2004	#4 (permalink)
bringerofwar Registered Member Join Date: Feb 2004 Posts: 9	Yeah, i can see that i should have done that So, Linksys BEFW11S4 V3 http://www.villagephotos.com/pubbrow...elected=794249