Lucent silver to gold - Page 3

CrackerStealth · 07-07-2003

I say just keep on trying with different switches. I couldn't get my Silver card to write with the -vb switch, always would give me Status Command Not Signaled error. Also, I'm not sure if your reading the PDA, booting back to Windows to edit the file then restart the computer in DOS mode again to write but that never worked for me. I had to use the DOS edit command and stay in DOS mode for the entire process for it to work. Just a thought.

peekitty · 07-07-2003

Quote:

Originally posted by lincomatic
can everyone post their primary/secondary firmware for the cards that worked and failed?

This one was successfully flashed to gold:

Lucent Avaya
card: variant 1, v4.02
primary: variant 1, v4.04
station: variant 2, v8.10

I'm seeing a pattern here...

TheSovereign · 07-07-2003

mine also failed
using agere silver
----------------------------------------
download buffer: page 60; offset 0; size 2000; timeout 5000 ms
error - command 322 never signaled status!
download error
FAILED.
ERROR ENCOUNTERED. Returns ERRORLEVEL=1

norm · 07-08-2003

found an older copy of the flash.exe utility. version 0.3b

www.hawkingtech.com/download/we110.exe

under the romcode directory, you may like to test?

TheSovereign · 07-08-2003

tried it.....same error except now i dont have to use -legacy
i believe as lincomatic stated the cards are somehow locked....

lincomatic · 07-08-2003

Quote:

Originally posted by TheSovereign
tried it.....same error except now i dont have to use -legacy
i believe as lincomatic stated the cards are somehow locked....

is the card version < 4.02 on the card that failed?

TheSovereign · 07-08-2003

yes 4.0

vu2vu · 07-10-2003

Can someone post the xx values for a dell trumobile card? Even better, can someone private message me with their dell pda file. I want to figure out where the mac address is stored. I know I should have backed it up. Just so everyone learns from my mistake. Don't try deleting the xx values in a attempt to trick your card into thinking its an regular orinoco card.

6 109 xx3 3 2b 0 0

By the way. I don't think the cards are locked. Whe I tried to write with my compaq notebook it failed. I borrowed a sony viao and it worked like a charm.

lincomatic · 07-10-2003

Quote:

Originally posted by vu2vu
Can someone post the xx values for a dell trumobile card? Even better, can someone private message me with their dell pda file. I want to figure out where the mac address is stored. I know I should have backed it up. Just so everyone learns from my mistake. Don't try deleting the xx values in a attempt to trick your card into thinking its an regular orinoco card.

6 109 xx3 3 2b 0 0

By the way. I don't think the cards are locked. Whe I tried to write with my compaq notebook it failed. I borrowed a sony viao and it worked like a charm.

the mac addr is in line 101. see the dump above. you can change the mac addr w/ a command line switch instead of editing the PDA.

what error code did you get on your compaq?

norm · 07-10-2003

could you say which station variant your dell truemobile card is?

vu2vu · 07-11-2003

norm, varient 4 version 5.00

lincomatic, standard error. I forgot what it was, but its same one everyone is getting.

anyone have the xx values for the dell truemobile yet? My card is still busted.

norm · 07-11-2003

thats odd mine is the same variant but i can not access it.

also aren't all dell truemobiles already 128bit?

vu2vu · 07-11-2003

yes they are. i had some trouble with airsnort with the new firmware. I was trying to downgrade. I thought that if i removed the xx values my card would think it was a oringal orinoco making it easier to change firmware in future. Is there any way you can get a dump of your PDA? This is a brand new card. I would hate for it to go to waste. Try the -legacy switch. I got that to dump my pda using the compaq notebook. It just refused to write using it though. I had to go to a sony viao. I think it might be the pcmcia chipset TI (compaq) vs Ricoh (sony)

802 · 07-11-2003

I keep on getting RID FD01 errors when i try to write, anyone have any ideas? downloading is fine.

norm · 07-11-2003

Quote:

Originally posted by vu2vu
I thought that if i removed the xx values my card would think it was a oringal orinoco making it easier to change firmware in future.

for that you would most probably need to change the CIS string (CIS String: Version 5.0 Dell TrueMobile 1150 Series PC Card Version 01.01).

However, im sceptical as to whether that would work because the Dell card is a different variant.

Btw couldnt you guess the 'xx' values?

07-07-2003	#33 (permalink)
TheSovereign Master of the universe Join Date: Jun 2002 Location: chicago Posts: 658	mine also failed using agere silver ---------------------------------------- download buffer: page 60; offset 0; size 2000; timeout 5000 ms error - command 322 never signaled status! download error FAILED. ERROR ENCOUNTERED. Returns ERRORLEVEL=1 __________________ SO SAYS TheSovereign Last edited by TheSovereign : 07-07-2003 at 08:19 PM.

07-08-2003	#35 (permalink)
TheSovereign Master of the universe Join Date: Jun 2002 Location: chicago Posts: 658	tried it.....same error except now i dont have to use -legacy i believe as lincomatic stated the cards are somehow locked.... __________________ SO SAYS TheSovereign Last edited by TheSovereign : 07-08-2003 at 08:21 AM.

07-08-2003	#37 (permalink)
TheSovereign Master of the universe Join Date: Jun 2002 Location: chicago Posts: 658	yes 4.0 __________________ SO SAYS TheSovereign

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-07-2003	#31 (permalink)
CrackerStealth Registered Member Join Date: Feb 2003 Posts: 23	I say just keep on trying with different switches. I couldn't get my Silver card to write with the -vb switch, always would give me Status Command Not Signaled error. Also, I'm not sure if your reading the PDA, booting back to Windows to edit the file then restart the computer in DOS mode again to write but that never worked for me. I had to use the DOS edit command and stay in DOS mode for the entire process for it to work. Just a thought.

07-08-2003	#34 (permalink)
norm Registered Member Join Date: May 2002 Location: UK Posts: 69	found an older copy of the flash.exe utility. version 0.3b www.hawkingtech.com/download/we110.exe under the romcode directory, you may like to test?

07-10-2003	#38 (permalink)
vu2vu Registered Member Join Date: Jul 2003 Posts: 6	Can someone post the xx values for a dell trumobile card? Even better, can someone private message me with their dell pda file. I want to figure out where the mac address is stored. I know I should have backed it up. Just so everyone learns from my mistake. Don't try deleting the xx values in a attempt to trick your card into thinking its an regular orinoco card. 6 109 xx3 3 2b 0 0 By the way. I don't think the cards are locked. Whe I tried to write with my compaq notebook it failed. I borrowed a sony viao and it worked like a charm.

07-10-2003	#40 (permalink)
norm Registered Member Join Date: May 2002 Location: UK Posts: 69	could you say which station variant your dell truemobile card is?

07-11-2003	#41 (permalink)
vu2vu Registered Member Join Date: Jul 2003 Posts: 6	norm, varient 4 version 5.00 lincomatic, standard error. I forgot what it was, but its same one everyone is getting. anyone have the xx values for the dell truemobile yet? My card is still busted.

07-11-2003	#42 (permalink)
norm Registered Member Join Date: May 2002 Location: UK Posts: 69	thats odd mine is the same variant but i can not access it. also aren't all dell truemobiles already 128bit?

07-11-2003	#43 (permalink)
vu2vu Registered Member Join Date: Jul 2003 Posts: 6	yes they are. i had some trouble with airsnort with the new firmware. I was trying to downgrade. I thought that if i removed the xx values my card would think it was a oringal orinoco making it easier to change firmware in future. Is there any way you can get a dump of your PDA? This is a brand new card. I would hate for it to go to waste. Try the -legacy switch. I got that to dump my pda using the compaq notebook. It just refused to write using it though. I had to go to a sony viao. I think it might be the pcmcia chipset TI (compaq) vs Ricoh (sony)

07-11-2003	#44 (permalink)
802 Registered Member Join Date: Feb 2003 Posts: 3	I keep on getting RID FD01 errors when i try to write, anyone have any ideas? downloading is fine.