NetStumbler.org Forums

Go Back   NetStumbler.org Forums > WiFi Forums > Hardware
Reload this Page Moded my Senao but it does not work SL-5354CB
Register Search Today's Posts Mark Forums Read

Reply
Page 1 of 2 1 2 >
 
LinkBack Thread Tools Display Modes
Old 01-28-2007   #1 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
Moded my Senao but it does not work SL-5354CB
Hi all,

Any experienced modders out there that can tell me why my modded card is not working?

It seems that the card is using the internal antennas and not the external one when connected. Here are some generic pictures of the card and my modded card, any recommendations would be appriciated.

http://img254.imageshack.us/my.php?image=modei0.jpg
http://img78.imageshack.us/my.php?im...sectionhf5.jpg
http://img255.imageshack.us/my.php?i...l5354cbxq8.jpg

Anyone know if this card does Turbo Mode?

Thanks
Setsquare is offline   Reply With Quote
Old 01-28-2007   #2 (permalink)
Dutch
Humourless EuroMod.
 
Dutch's Avatar
 
Join Date: Mar 2004
Location: City of Mermaids, Denmark
Posts: 6,819
Quote:
Originally Posted by Setsquare
Hi all,

Any experienced modders out there that can tell me why my modded card is not working?

It seems that the card is using the internal antennas and not the external one when connected. Here are some generic pictures of the card and my modded card, any recommendations would be appriciated.

http://img254.imageshack.us/my.php?image=modei0.jpg
http://img78.imageshack.us/my.php?im...sectionhf5.jpg
http://img255.imageshack.us/my.php?i...l5354cbxq8.jpg

Anyone know if this card does Turbo Mode?

Thanks
Are you sure you soldered something to the antenna section of the PCB ? As far as I can see you didn't.

The two F shaped areas are the antennas.

Dutch
__________________
All your answers are belong to Google. SEARCH DAMMIT!
Warning. Warning.
Low C8H10N4O2 level detected. Operator halted....
Dutch is offline   Reply With Quote
Old 01-28-2007   #3 (permalink)
Airstreamer
Sniffin' the aether
 
Airstreamer's Avatar
 
Join Date: Nov 2004
Location: A little North of Reason
Posts: 2,834
Dutch ...Psst...
For the 'A' band...

(I'm pretty sure.)
__________________
"America is at that awkward stage.
It's too late to work within the system, but too early to shoot the bastards.."

- Claire Wolfe, 101 Things to Do 'Til the Revolution
Airstreamer is offline   Reply With Quote
Old 01-28-2007   #4 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
Yeah I also thought those were for a band, this card is not a but I think they design the pcb the same
Setsquare is offline   Reply With Quote
Old 01-28-2007   #5 (permalink)
beakmyn
Free Public Wifi
 
beakmyn's Avatar
 
Join Date: Aug 2003
Posts: 5,068
Quote:
Originally Posted by Setsquare
Hi all,

Any experienced modders out there that can tell me why my modded card is not working?

It seems that the card is using the internal antennas and not the external one when connected. Here are some generic pictures of the card and my modded card, any recommendations would be appriciated.

http://img254.imageshack.us/my.php?image=modei0.jpg
http://img78.imageshack.us/my.php?im...sectionhf5.jpg
http://img255.imageshack.us/my.php?i...l5354cbxq8.jpg

Anyone know if this card does Turbo Mode?

Thanks
That would be because you didn't remove the internal antenna from the circuit.
Here's a recommendation cut the trace and remove the internal antenna of this doesn't guarantee any results since there's no telling if the impedance is correct or that your mod is even functional.
__________________
┌──────────────────────────────┐
╞ NS Icons Explained|et hoc genus omne ╡
└──────────────────────────────┘

Creating yesterday's future, Today!
beakmyn is offline   Reply With Quote
Old 01-28-2007   #6 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
Cut the trace but still no luck

Would anyone recomend unsoldering the connector and making the core and braid a bit longer and touching on diff places while keeping the ground on the same place while scanning.

I varified that the braided wire is soldered to ground with a multimeter but I dont know how accurate this is.

Im sure there was a user who modded a card on these baords that was the same layout but it was a SMC card. I can now only find his pics in google cache and they are to small to view

http://www.netstumbler.org/archive/i...p/t-13652.html

http://images.google.co.za/images?hl...-8&sa=N&tab=wi

Thanks
Last edited by Setsquare : 01-28-2007 at 01:09 PM.
Setsquare is offline   Reply With Quote
Old 01-28-2007   #7 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
http://images.google.co.za/images?sv...mod_inside.jpg
Setsquare is offline   Reply With Quote
Old 01-28-2007   #8 (permalink)
Airstreamer
Sniffin' the aether
 
Airstreamer's Avatar
 
Join Date: Nov 2004
Location: A little North of Reason
Posts: 2,834
Quote:
Originally Posted by Setsquare
Yeah I also thought those were for a band, this card is not a but I think they design the pcb the same
What makes you say the card is not for A band as well?

This seems to indicate that it is: http://www.senao-me.com/products-det...Id=5&ProdId=12

Based on the model # you supplied, anyway.

Looking at the pix you supplied, the silkscreen does show where additional parts would go in the A band circuit.

Is this some bastard version of the card?
__________________
"America is at that awkward stage.
It's too late to work within the system, but too early to shoot the bastards.."

- Claire Wolfe, 101 Things to Do 'Til the Revolution
Airstreamer is offline   Reply With Quote
Old 01-28-2007   #9 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
It says 802.11g on the card itself
Setsquare is offline   Reply With Quote
Old 01-28-2007   #10 (permalink)
Airstreamer
Sniffin' the aether
 
Airstreamer's Avatar
 
Join Date: Nov 2004
Location: A little North of Reason
Posts: 2,834
Quote:
Originally Posted by Setsquare
It says 802.11g on the card itself
Howz about an FCC #?
__________________
"America is at that awkward stage.
It's too late to work within the system, but too early to shoot the bastards.."

- Claire Wolfe, 101 Things to Do 'Til the Revolution
Airstreamer is offline   Reply With Quote
Old 01-29-2007   #11 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
Ni3-at30v114
Setsquare is offline   Reply With Quote
Old 01-29-2007   #12 (permalink)
wrzwaldo
I amuse you?
 
Join Date: Dec 2003
Posts: 9,147
Quote:
Originally Posted by Setsquare
Cut the trace but still no luck
Just curious. Where did you cut the trace? Have you considered connecting to the other antenna feed? Is your coax shorted?
Last edited by wrzwaldo : 01-29-2007 at 09:30 AM.
wrzwaldo is offline   Reply With Quote
Old 01-29-2007   #13 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
http://img263.imageshack.us/img263/5231/cutio3.jpg
Setsquare is offline   Reply With Quote
Old 01-29-2007   #14 (permalink)
Setsquare
Registered Member
 
Join Date: Jan 2007
Posts: 9
Just a thought, the antennas that are F shaped are hooked up in a way that they are connected to the tx/rx LED and that flashes when data is sent. Does this help at all, are those infact the correct antennas?

I bought this card really cheap ($14) for just this purpose to hack around so no big loss if I kill the thing.

So Ill take any options to try make it work.
Setsquare is offline   Reply With Quote
Old 01-29-2007   #15 (permalink)
streaker69
Psychic Amish Stumbler
 
streaker69's Avatar
 
Join Date: Jul 2004
Location: Virginville, BlueBall, Bird In Hand, Intercourse, Paradise, PA
Posts: 12,315
Quote:
Originally Posted by Setsquare
Just a thought, the antennas that are F shaped are hooked up in a way that they are connected to the tx/rx LED and that flashes when data is sent. Does this help at all, are those infact the correct antennas?

I bought this card really cheap ($14) for just this purpose to hack around so no big loss if I kill the thing.

So Ill take any options to try make it work.
They would be connected but not directly. There would be some other circuitry involved in the translation of incoming/outgoing data to make LED's flicker.
__________________
Treat your gun like your genitals, only whip it out when it's absolutely necessary.
streaker69 is offline   Reply With Quote
Reply
Page 1 of 2 1 2 >

« Linksys WPC54G Version 5 Antenna Mod (In Progress) | USB power Output »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Google
 
Web NetStumbler.org

All times are GMT -7. The time now is 09:56 AM.

Contact Us - NetStumbler.org - NetStumbler.com - Online Backup - Archive - Top

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 ©2007, Crawlability, Inc.


All messages express the views of the author and are for entertainment purposes only. Netstumbler.org cannot be held responsible for the authenticity of the content or the actions of its members. By using this site and its services, you warrant that you will not post any messages that are discriminating, obscene, hateful, threatening, or otherwise violates any laws and you release Netstumbler.org from any future claims of any kind whatsoever including, but not limited to, addiction and loss of productivity. All forum messages, private messages and any other content are properties of Netstumbler.org. Even if publicly available, personal or copyrighted information are not to be posted without the consent of the owner. Distribution of licensed and copyrighted materials in any way not endorsed by the copyright owner is strictly prohibited. You may not use this site and its resources to spam other sites or individuals or perform any action that violates any law. Items sold or bought in the For Sale forum are sold as is and no warranty or insurance of any kind is provided. Netstumbler.org cannot be held responsible for the outcome of any transactions and no warranty of any kind is provided, either express or implied. Vulgar words are not allowed in the subject lines ; they may be used in the message body in any forum. The Administrator, Super Moderators and Moderators of Netstumbler.org have the right to remove, edit, move or close any thread for any reason and to reveal your identity and other known information in the event of a complaint or legal action arising from any message posted by you.