SMC cards - latest drivers - where???

splode · 09-21-2002

I've read that some have gotten NetStumbler to work with the SMC 2632 cards. I've been to the SMC site. I download what looks like the latest drivers... but NS no workie when I run it.

I'm running Win2kPro on a laptop with an SMC 2632W card. Latest version of drivers appears in my system as 1.32.0. Someone says they've got 1.32.1. I'm just wondering where to find those "later" drivers.

TIA

davepc · 10-01-2002

I found these....
http://www.smc-europe.com/english/su...rel/2632W.html

Only difference i see is the version of the utility

-dave-

(and can't get it to work w/ netstumbler in w2k)
----------------
Woohoo.
Updated the firmware from this site.
Now works in NS

davepc · 10-01-2002

and you can change the mac addy....

splode · 10-01-2002

Hey, thanks man - will try that out.

No luck on my end w/ w2k, either. Will try this new set of drivers.

Thanks again

splode · 10-10-2002

eh - still no luck

oh well...

tam · 01-23-2003

Win2k, SMC2632W with 0.08.03 firmware and NS 0.3.30
- works great.
Thanks for the pointers!

highgravity · 01-29-2003

Hi,
running w2K, NS 0.3.30, SMC 2632W (with the downloaded flash from the thread above).
I still get " a device attached to this system is not functioning"
Any suggestions?
Thanks

geodog · 02-05-2003

I haven't been able to get the flash upgrade done - I'm still at 7...

Any advice?

compworx · 02-26-2003

email us at compworx_computers@yahoo.com for the driver, then boot into safe mode and remove your cards driver, now install the driver that we sent you (It's the industry standard NDIS 5 driver) and reboot, if you need any help, email Tech Support at the above address.

AttilaTheHun · 05-26-2003

This Prism driver is no longer available for free download.. where can I get it then?

paran0id · 05-26-2003

check out the thread at:
http://forums.netstumbler.com/showth...ore+on+the+usr

or just search for the one titled "more on the usr2410 nic"

apparently several manufacturers use the same basic hardware as the SMC 2632. I have used the US robotics firmware & driver on my SMC 2632 with win 2k and XP and netstumbler has worked each time.

charlesw · 11-04-2003

Thanks to your link on the newest drivers, my SMC 2435W EZ Connect Turbo now works with Net Stumbler!

Thanks so much.

Also, I didn't do any firmware changes. As far as I can see, I haven't found any firmware for the SMC wireless adapters.

Thanks again.

09-21-2002	#1 (permalink)
splode Registered Member Join Date: Sep 2002 Posts: 3	SMC cards - latest drivers - where??? I've read that some have gotten NetStumbler to work with the SMC 2632 cards. I've been to the SMC site. I download what looks like the latest drivers... but NS no workie when I run it. I'm running Win2kPro on a laptop with an SMC 2632W card. Latest version of drivers appears in my system as 1.32.0. Someone says they've got 1.32.1. I'm just wondering where to find those "later" drivers. TIA

01-23-2003	#6 (permalink)
tam Registered Member Join Date: Jan 2003 Posts: 1	SMC2632W and NS: works fine with firmware upgrade Win2k, SMC2632W with 0.08.03 firmware and NS 0.3.30 - works great. Thanks for the pointers!

01-29-2003	#7 (permalink)
highgravity Registered Member Join Date: Jan 2003 Location: Toronto, Canada (ish) Posts: 1	No luck Hi, running w2K, NS 0.3.30, SMC 2632W (with the downloaded flash from the thread above). I still get " a device attached to this system is not functioning" Any suggestions? Thanks

02-05-2003	#8 (permalink)
geodog Registered Member Join Date: Feb 2003 Posts: 1	getting NS working with SMC I haven't been able to get the flash upgrade done - I'm still at 7... Any advice?

02-26-2003	#9 (permalink)
compworx Registered Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 23	smc 2632 works with the prism driver email us at compworx_computers@yahoo.com for the driver, then boot into safe mode and remove your cards driver, now install the driver that we sent you (It's the industry standard NDIS 5 driver) and reboot, if you need any help, email Tech Support at the above address. Last edited by compworx : 11-04-2003 at 10:59 PM.

10-01-2002	#4 (permalink)
splode Registered Member Join Date: Sep 2002 Posts: 3	Hey, thanks man - will try that out. No luck on my end w/ w2k, either. Will try this new set of drivers. Thanks again

10-10-2002	#5 (permalink)
splode Registered Member Join Date: Sep 2002 Posts: 3	eh - still no luck oh well...

05-26-2003	#10 (permalink)
AttilaTheHun Registered Member Join Date: May 2003 Location: Vancouver Posts: 1	This Prism driver is no longer available for free download.. where can I get it then?

05-26-2003	#11 (permalink)
paran0id Registered Member Join Date: Apr 2002 Location: pittsburgh, PA Posts: 30	check out the thread at: http://forums.netstumbler.com/showth...ore+on+the+usr or just search for the one titled "more on the usr2410 nic" apparently several manufacturers use the same basic hardware as the SMC 2632. I have used the US robotics firmware & driver on my SMC 2632 with win 2k and XP and netstumbler has worked each time.

11-04-2003	#12 (permalink)
charlesw Registered Member Join Date: Nov 2003 Posts: 5	SMC EZ Connect Turbo 2435W works Thanks to your link on the newest drivers, my SMC 2435W EZ Connect Turbo now works with Net Stumbler! Thanks so much. Also, I didn't do any firmware changes. As far as I can see, I haven't found any firmware for the SMC wireless adapters. Thanks again.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode