POST YOUR SUCCESSFUL PRISM/2K/XP Configurations here

(now) successful Prism config

Postby pinkuff » Wed Feb 05, 2003 3:02 pm

Thinkpad X30
Win XP Pro
High rate wireless LAN Mini-PCI Adapter with Modem II
NS 0.3.30 with NDIS 5.1 option selected

woo-hoo !!
AYBABTU
pinkuff
Mini Stumbler
 
Posts: 8
Joined: Tue Feb 04, 2003 6:16 am
Location: Italy

Siemens USB

Postby Thierry » Sat Feb 08, 2003 1:41 pm

Windows XP
Fujitsu Siemens CONNECTBIRD USB
NDIS 5.1 works !

This USB item uses Prism 2.5.
Thierry
Mini Stumbler
 
Posts: 1
Joined: Sat Feb 08, 2003 1:37 pm

Postby jpainter » Sat Feb 08, 2003 6:40 pm

gigafast we-741 usb works with ndis 5.1 and windows xp
2002 Z-71 Rolling with an ITX MOBO, 10.4" touchscreen, 40 Gig HD, and a DVD ROM.

http://www.truckputer.com
jpainter
Mini Stumbler
 
Posts: 38
Joined: Sun Jul 14, 2002 8:43 pm

Netstumbler and Belkin Wireless NIC from PCWorld

Postby simdog » Fri Feb 21, 2003 8:56 am

I am not sure if this is the right place to post this.

I have just bought a Belkin Wireless Network card, model number F5D6020 from PCWorld and it is working no problems with Netstumbler.

Windows 2000 O/S on a Compaq Evo N600C Laptop

I'm happy
simdog
Mini Stumbler
 
Posts: 2
Joined: Mon Feb 03, 2003 7:47 am

SMC 2632W V.2

Postby hvulin » Mon Feb 24, 2003 2:13 am

Hi, I installed smc2632W V.2 on my IBM T23, with win2000 SP3 and it didn't work. Then I went to \winnt\system32\drivers directory and copied smcpcm98.sys to smcpcm98x.sys (this is the driver windows installed), and then copied smcpcmxp.sys to smcpcm98.sys. After a reeboot I can see my card reckognised as NDIS 5.0 and can use it...
hvulin
Mini Stumbler
 
Posts: 1
Joined: Wed Feb 19, 2003 3:02 am
Location: Zagreb, Croatia

XP PRO and SMC2632W

Postby compworx » Wed Feb 26, 2003 5:04 am

using prism drivers from http://www.intersil.com/design/prism/ss/crack-n-peel/prod-drvr/pcm-cnp-lic-win.asp

Merged from another post by compworx:

Any card using the Prism chipset works.
If you're using a card with the prism chipset, e.g. SMC 2632W, simply download the prism driver (NDIS 5) from the
http://www.intersil.com/design/prism/ss/crack-n-peel/prod-drvr/pcm-cnp-lic-win.asp.

Then boot into safe mode, unload your cards drivers, install the prism driver and reboot. if you have any problems let me know.

compworx
Former SMC Tech Support Suppervisor
compworx
Mini Stumbler
 
Posts: 23
Joined: Wed Feb 26, 2003 12:00 pm
Location: Las Vegas, NV

Asante 1211-DP

Postby kacerdias » Fri Feb 28, 2003 1:11 pm

I've successfully gotten the following setup to work with NS:

WinXP Pro SP1
Dell Latitude HGT500 - 640MB RAM
Asante 1211-DP wlan card (Prism 2.5 chipset)
Intersil reference drivers - they're newer/more stable that OEM

This card is pretty cool since it has 2 MMCX ports which can be used to connect external antennae. It's a good thing too because the snap on antenna that comes with it has really dismal range on its own....
kacerdias
Mini Stumbler
 
Posts: 9
Joined: Mon Dec 30, 2002 5:35 pm
Location: Austin, TX

Postby zipo » Sat Mar 01, 2003 11:00 pm

wpc11 ver3 and ns work fine using ndis the other wouldnt work, well it worked great until that SOB pulled out in front of me; caused me to hit the brakes and my lappy to go flying. It landed on the card and snapped the end off so now it dosent work at all ... but ordered a oronico a/b and should have it by monday so its ok now I guess :P Damn texas drivers!
zipo
Mini Stumbler
 
Posts: 28
Joined: Sat Mar 01, 2003 10:38 pm
Location: USA

Postby notek » Sun Mar 02, 2003 8:36 pm

toshiba 14xx laptop here with a DWL 650+ card. Works fine with the 3.0 beta drivers. Don't even have to shut down the Airplus Utility. Got an error the first try, then shut down the airplus utility. Just fired it up with the utility on and it works!

xp pro - service pack 1a

New 650 3.0 drivers:

http://support.dlink.com/products/view.asp?productid=DWL%2D650%2B
notek
Mini Stumbler
 
Posts: 1
Joined: Sun Mar 02, 2003 8:30 pm

Linksys wpc54g

Postby solfrio » Wed Mar 05, 2003 9:27 pm

Just in case anybody wants to know, I bought the Linksys wpc54g wireless adapter card and it works with Netstumbler. The wpc54g pc card has the Broadcom chipset, unlike other Linksys cards that use the Interisel prism chipset. I'm running it under Windows xp home with (service pack 1).
solfrio
Mini Stumbler
 
Posts: 1
Joined: Wed Mar 05, 2003 9:15 pm

Buffalo WLI-CB-G54 and Proxim Harmony 8430

Postby netwalker » Fri Mar 07, 2003 7:52 am

Just thought i'd add my 2-penn'orth.

I tried a Buffalo 54mbps CardBus Card.
WLI-CB-G54
(manufacturer Melco. inc.)

Working fine under XP
Appears as NDIS

The XP autoconnect seems unaffected,
i pulled up and stopped at a strong signal...
before i even got the laptop on my lap
i was notified of incoming mail !

Not sure who what chipset
but it seems to work fine.

on the other hand....a proxim harmony 8430 isn't even recognised by NS :(
actually XP doesn't see it as a wireless card either.
it see it as just another LAN card.
anyone know why ?

cheers

NW
netwalker
Mini Stumbler
 
Posts: 1
Joined: Fri Mar 07, 2003 7:18 am
Location: south uk

Fujitsu WinXP / Win2000

Postby paradyne_shift » Fri Mar 07, 2003 1:03 pm

Fujitsu Lifebook A1010
Internal WiFi - LANEscape XI-726
(installs as a USB device)

I have a Duel boot system with W2K Pro and WinXP Pro.
I only use W2Kpro and Network Stumbler works Great!

I have two devices to chose from...

LANEscape/XI-726 Wireless Adapter ORiNOCO
(does not work)

and

LANEscape/XI-726 Wireless Adapter Prism 2
(Works Great!)

I am guessing that the Prism 2 is there because of the WinXP???
Dont Panic!
paradyne_shift
Mini Stumbler
 
Posts: 1
Joined: Fri Mar 07, 2003 10:26 am
Location: Dallas

Postby shajrkyj72 » Sun Mar 09, 2003 11:43 pm

Toshiba Tecra 500CDT (old laptop)
3Com 3crwe62092b WiFi card
win 2000 pro
netstumbler 0.3.30

Didnt expect it to work according to docs and faq. Didnt work with default 3com drivers...:(

Downloaded and installed v2.1.1.3000 drivers and hey presto works a charm :p

Happy bunny apart from the lack of range thanks to the crappy 3com xjack aerial.
shajrkyj72
Mini Stumbler
 
Posts: 1
Joined: Sun Mar 09, 2003 9:29 pm

Postby zipo » Mon Mar 10, 2003 1:51 am

Senao WG-SL-2511CD PLUS EXT2

Works like a champ in XP, Ndis :p
zipo
Mini Stumbler
 
Posts: 28
Joined: Sat Mar 01, 2003 10:38 pm
Location: USA

Support for Prism Chipset Cards (3Com)

Postby jroe6352 » Tue Mar 11, 2003 1:14 pm

I read somewhere that the prism chipset (and 3Com Cards) weren't supported in netstumbler - maybe that info is wrong or out of date but I wanted to let everyone know that I have successfully used a 3Com Airconnect Wireless card with Netstumbler - it's the PCX version that I pulled from the PCI interface and I was able to get it working in my laptop using Intersil's evaluation drivers. So either my info wrong or the Intersil drivers allow the Prism cards to work with Netstumbler.
jroe6352
Mini Stumbler
 
Posts: 1
Joined: Tue Mar 11, 2003 1:11 pm
Location: Central Wisconsin

PreviousNext

Return to NetStumbler

Who is online

Users browsing this forum: No registered users and 1 guest

cron