Postby blimpey » Wed Apr 30, 2003 5:33 am

Dell Inspiron 8200
Belkin pcmcia model: F5D7010uk as NDIS 5.1

Stumbler is stumbling well. :)
Mini Stumbler
Posts: 1
Joined: Wed Apr 30, 2003 1:09 am

Dell/Siemens/Windows 2K

Postby tomba » Tue May 06, 2003 5:51 am

My laptop was recently upgraded to Windows 2K, I can now run a Prism2 type card [Siemens SpeedStream] that one is the only one I have.

Mini Stumbler
Posts: 3
Joined: Tue Dec 31, 2002 3:28 pm
Location: Oregon

Postby Atlas337 » Thu May 08, 2003 8:40 am

Delll 600m

Windows XP Home
Intel ProWireless 2100

Mini Stumbler
Posts: 2
Joined: Thu May 01, 2003 8:37 pm

Win 2K, Linksys WPC11 ver 3, all OK!

Postby aharris1961 » Thu May 08, 2003 12:28 pm

I diabled the Linksys configuration utility, installed the latest NS, inserted the WPC11, and bingo!

All functions appear to work, charting (s/n graphs).

I am using the ndis 5.1 device selection also.

Dell Lattitude 610

Mini Stumbler
Posts: 6
Joined: Thu Apr 17, 2003 10:45 am

Just bought a D-Link DWL-520+

Postby bjl667 » Sun May 11, 2003 4:49 am

My Custom Built System:
AMD Athlon 700Mhz
Maxtor 5T060H6 - ATA 100, 60 Gig
Geforce FX - 5200 (2x/4x/8x) AGP - 128 MB DDR (At 400Mhz)
SB-Live! 5.1
D-Link DWL-520+ (802.11b Enhanced)

So far NetStumbler works perfect with this card, on Windows XP Pro 2600 Build. :D :cool:
Mini Stumbler
Posts: 1
Joined: Mon May 05, 2003 6:44 am

Postby Hawkje » Sun May 11, 2003 12:23 pm

Laptop: IBM Thinkpad 600E
OS: Windows 2000 Server SP3
Card: Edimax EW-7106PC
Seen as: Realtek RTL8180 Wireless LAN (Mini-)PCI NIC
Driver: Realtek 5.135.415.2003 (15-04-2003)
Netstumbler sees it as: NDIS 5.1

The card just started working after downloading the newest drivers.

BTW. Isn't is a better idea if someone would list all the named cards and clean up this thread (open a new one?). Would be much easier then to go through all the posts.
Mini Stumbler
Posts: 1
Joined: Sun May 11, 2003 12:09 pm

3com card works on latest version

Postby mpforste » Fri May 16, 2003 11:27 am

Just to let you all know I have a 3com 11Mbps Wireless PC card (3CRSHPW796) NDIS 5.1 card.
Mini Stumbler
Posts: 1
Joined: Fri May 16, 2003 11:20 am

Postby tdiddi » Thu May 22, 2003 7:19 am

Finally got my Linksys WPC11 v3 card to work w/ NS!!! I using XP Pro w/ SP1 on an HP Omnibook 900b. Here's what I did, uninstalled the configuration utility and uninstall the card. Reinstalled the WPC11 by itself and use XP to configure the card.
Mini Stumbler
Posts: 1
Joined: Wed May 21, 2003 2:06 pm

SB air card

Postby hydro27405 » Thu May 22, 2003 7:45 am

In WIN2k the SmartBridges AirCard with Atmel chipset works great and seems to pick up more aps than my gold card.
Mini Stumbler
Posts: 106
Joined: Sun Dec 29, 2002 7:15 pm
Location: MN

Netgear MA401

Postby mopsie » Sat Jun 07, 2003 7:04 am

Toshiba Satellite S501
Netgear MA410 (new model)

Works a treat - when's the next release due??
netstumbler1.jpg (18.93 KiB) Viewed 2065 times
Mini Stumbler
Posts: 91
Joined: Fri May 30, 2003 8:52 am
Location: UK

Postby Bramage » Sat Jun 07, 2003 12:43 pm

Toshiba Satellite 2450-101
OS: Windows 2000 SP3
with a Sitecom WL-002 Pcmcia card'

Firmware version: 8c304
Driver version: 4.0.7
Mini Stumbler
Posts: 1
Joined: Sat Dec 28, 2002 8:33 am
Location: Netherlands

WPC54G W2K on ThinkPad T20

Postby jeffb2 » Tue Jun 10, 2003 10:19 am

Running the Linksys Wireless-G PCMCIA card on a Thinkpad T20.

These cards have known issues with Texas Inst. CardBus controllers which stop them from working after a few days. Once Linksys gets their act together, it will be a nice card for the system.

Mine stopped working, so I'm returning it today for a NetGear
Mini Stumbler
Posts: 2
Joined: Tue Jun 10, 2003 10:14 am

Postby rvella » Thu Jun 12, 2003 11:02 pm

Linksys WUSB11 (v2.6) and SMC 2602W (PCI, v3)

Linksys WUSB11 USB is great for wardriving, but does not show the channel an AP is on. I plan to replace it with an Orinoco Gold card.

The SMC 2602W setup is not meant for wardriving (as it's a stationary machine in my living room), but it works in NetStumbler nonetheless. It does not use a prism based chipset (it uses NDIS 5.1) and the AP seems to disappear every other scan. But, like I said, this is not a wardriving machine (although I could set it up in my car because it's a Shuttle PC -- a nice 200+ watt inverter should do the trick :D).
Mini Stumbler
Posts: 10
Joined: Mon Jun 09, 2003 11:22 am

Postby n0d3 » Sat Jun 28, 2003 8:06 am

Wireless Card: Creative Network Blaster Wireless LAN PCMCIA Card (2021) (Broadxent)

Working perfectly on a Dell Inspiron 2650 running Windows XP Professional Edition. Using the NDIS 5.1 selection.
Mini Stumbler
Posts: 2
Joined: Thu Jun 26, 2003 2:20 am

Nice Small Setup

Postby EvilCable » Sun Jun 29, 2003 9:11 pm

My setup is as follows:

Compaq Armada M300 (tiny machine)
(192MB RAM, 40GB, PIII 600, WinXPSP1, 12" LCD, I take off the MEU to save battery life (MEU has CDROM + FLOPPY))

Linksys WPC11 v3 PCMCIA card, works great with NDIS in NS

my other laptop is:ng
Sony Vaio PCG-FX290K
(512MB RAM, 40GB, PIII 1.2GHz, 16" LCD, WinXP)

Same card as above, using the same software.

The sony is my work laptop, it goes back and forth, its heavy as hell tho, so I usually only use it to log to and from work and if I'm going anywhere for work or on long trips (I'm on call so I usually have to take it with me)

The M300 is tiny, I love it for standard WarDriving, battery life also lasts about 2.5/3hr with the MEU (the mobile expansion unit) off. Its so tiny that I can hide it under my car seat when I goto the store or something (so its not hanging out in the open) when driving around.

The only thing I need is a good GPS unit and mabey one of the higher end cards, with the mag antenna ;-)

My AP SSID btw, "I_can_see_you!"
[size=75]Reality isn't as real as you think it is.
Points2Shop Ref-link.
Always in the pursuit of slack.
Posts: 63
Joined: Sun Jun 29, 2003 12:21 pm
Location: Inverness, FL


Return to NetStumbler

Who is online

Users browsing this forum: No registered users and 2 guests