Cards that reportedly do NOT work/ have problems w/NetStumbler 0.4

Questions and configuration information about the NetStumbler software

ZyXEL ZyAir G-300

Postby johntramp » Wed Sep 22, 2004 7:33 pm

I have a ZyXEL ZyAir G-300, which netstumbler seems to dislike. It will start, and sometimes run for a couple of seconds, detect any networks etc. but then it will crash and no longer respond to anything. I have tried this on 2 separate computers.
johntramp
Mini Stumbler
 
Posts: 9
Joined: Wed Sep 22, 2004 6:59 pm

Corega WLCB-54GT with N.S. 0.4 got some problem

Postby zhuxuan » Sat Sep 25, 2004 7:45 am

OS: xp home sp1
xp pro sp1

corega WLCB-54GT (Prism GT)

NDIS 5.1

If it can scan APs, everything is OK.
If it can't scan APS, the cpu usage will increase to 100%.

Any ideas?
Thanks.
zhuxuan
Mini Stumbler
 
Posts: 2
Joined: Sat Sep 25, 2004 7:32 am

Moved messages

Postby Mother » Mon Oct 18, 2004 11:54 pm

Just so everyone concerned knows, I have moved the latter part of the thread started by a really simple question that's been trodden on, FAQ'd etc. for years, and turned into flames. The rest of the previous messages stay, as the thread itself is of interest and was started by Marius.

Cheers,

Mother
Out of paper on drive C:

the.firehou.se
User avatar
Mother
 
Posts: 204
Joined: Sat Apr 13, 2002 6:37 am
Location: Barcelona, Spain

Proxim RangeLAN-DS

Postby tricade » Thu Oct 21, 2004 9:53 am

My Proxim RangeLAN-DS W-Lan ( 8430 ) PCMCIA Card dont work's with Net Stumbler ....
tricade
Mini Stumbler
 
Posts: 3
Joined: Thu Oct 21, 2004 9:50 am

Postby Radiation » Sat Oct 23, 2004 6:42 am

marius wrote:Be warned that NS 0.4's Atheros support is poor. Yes, it works, but the driver has the annoying habit of reporting everything it's seen in the last 2 minutes, rather than what it can see right now. NS 0.4 works around this but it may cause APs to appear and disappear.

Use an Atheros card in NDIS 5.1 mode to see it without the workaround. It's scary.



Will this bug be fixed in the next versions of NetStumbler? Or does anyone even know why this card has this behaviour?

I hope to get an answer,

Sascha
Radiation
Mini Stumbler
 
Posts: 1
Joined: Sat Oct 23, 2004 6:38 am

Linksys G card with NS .4 ?

Postby Anomaly69 » Tue Nov 30, 2004 3:08 pm

Wish I could say the same Marcus. NS wont recognize my Linksys wpc54g ver.2 card.

You have to do any tweaks or anything to get it working?
Anyone got ideas?

BTW, I'm running Win2k Pro SP4 on a Dell Latitude LS.


Marcust99 wrote:I am very happy to report that my Linksys G card works perfectly with the new NetStumbler .4 version. MAJOR kudos to the author for getting this version out to work with the most popular cards!!

Marcus

Merged with proper thread.-g8t
Anomaly69
Mini Stumbler
 
Posts: 6
Joined: Wed Nov 24, 2004 5:03 pm

Postby Anomaly69 » Tue Nov 30, 2004 4:06 pm

Wish I could say the same Marcus. NS wont recognize my Linksys wpc54g ver.2 card.

You have to do any tweaks or anything to get it working?
Anyone got ideas?

BTW, I'm running Win2k Pro SP4 on a Dell Latitude LS.


Marcust99 wrote:I am very happy to report that my Linksys G card works perfectly with the new NetStumbler .4 version. MAJOR kudos to the author for getting this version out to work with the most popular cards!!

Marcus

Merged with proper thread.-g8t

Note to g8tkeeper: This post was exactly where it belongs, it was in direct response to someone stating that the card DOES WORK. If you move my post It won't be seen by the people I want to see it. Please don't move it again.
Anomaly69
Mini Stumbler
 
Posts: 6
Joined: Wed Nov 24, 2004 5:03 pm

Postby G8tK33per » Tue Nov 30, 2004 4:08 pm

Anomaly69 wrote:Wish I could say the same Marcus. NS wont recognize my Linksys wpc54g ver.2 card.

You have to do any tweaks or anything to get it working?
Anyone got ideas?

BTW, I'm running Win2k Pro SP4 on a Dell Latitude LS.



Merged with proper thread.-g8t

Note to g8tkeeper: This post was exactly where it belongs, it was in direct response to someone stating that the card DOES WORK. If you move my post It won't be seen by the people I want to see it. Please don't move it again.

No it wasn't. Deal with it and move on. Don't try me, do that again and your gone.
"Make yourselves sheep and the wolves will eat you." ~ Benjamin Franklin

Sons of Confederate Veterans
User avatar
G8tK33per
 
Posts: 6078
Joined: Fri May 09, 2003 4:00 am
Location: Goomba's Booty Boardwalk

Postby golden eagle » Tue Jan 18, 2005 6:31 pm

Intel Pro/Wireless 2200 (Dell 8600 XP/SP2): NDIS only
golden eagle
Mini Stumbler
 
Posts: 0
Joined: Tue Jan 18, 2005 6:01 pm

Postby wrzwaldo » Tue Jan 18, 2005 8:44 pm

golden eagle wrote:Intel Pro/Wireless 2200 (Dell 8600 XP/SP2): NDIS only



So Einstein, does it work or not?
wrzwaldo
 
Posts: 8995
Joined: Sun Dec 14, 2003 12:43 pm

Postby DreaM » Wed Feb 09, 2005 7:51 am

Hi there,

I have a Sitecom WL-011 PCMCIA card wich does not work with NS 0.4.0.

Bye

DreaM
DreaM
Mini Stumbler
 
Posts: 2
Joined: Wed Feb 09, 2005 7:32 am

Postby sethrd » Thu Feb 17, 2005 2:48 pm

I'm running a TRENDnet card, the TEW-421PC. Net Stumbler says no wireless adapter found.
sethrd
Mini Stumbler
 
Posts: 1
Joined: Thu Feb 17, 2005 2:45 pm

Linksys not recognized

Postby chris18e » Sat Feb 19, 2005 5:35 pm

Hey. I was just wondering if Netstumber 4 should recognize a Linksys WUSB11 network adapter as it doesnt on my new computer. I tried to find a similar post but couldnt so I figured I would ask. Thanks for the help guys.

Chris
chris18e
Mini Stumbler
 
Posts: 1
Joined: Fri Feb 18, 2005 3:19 pm
Location: NC

Postby wrzwaldo » Sat Feb 19, 2005 6:04 pm

chris18e wrote:Hey. I was just wondering if Netstumber 4 should recognize a Linksys WUSB11 network adapter as it doesnt on my new computer. I tried to find a similar post but couldnt so I figured I would ask. Thanks for the help guys.

Chris


http://www.netstumbler.org/showthread.php?t=12323

http://www.netstumbler.org/showthread.php?t=14341&highlight=WUSB11

http://www.netstumbler.org/showthread.php?t=13553&highlight=WUSB11

http://www.netstumbler.org/showthread.php?t=8184&highlight=WUSB11
wrzwaldo
 
Posts: 8995
Joined: Sun Dec 14, 2003 12:43 pm

Compaq iPaq USB 802.11b Adapter Not Working

Postby jetman » Mon Feb 21, 2005 7:44 pm

Would've like to have sent the Compat rept directly to the author, but when I launch NS, it immediately kills my working (and only) net connection via WiFi. Anyway, if this does make it to him, here's some info about the adapter:

Compaq iPAQ 11Mbps Wireless USB Adapter
HNW-200
FCC ID: MXF-WL280
Windows XP SP1
256MB of RAM

NS repts the adapter uses an Atmel chipset, but that's coming from the Device menu. Personally, I wouldn't know.

In case some other unfortunate soul is stuck w/ this clunker as I am, I've discovered that once NS kills the wireless connection, shut down the program and disable, then immed re-enable the WiFi adapter via the Network Connections folder, to recover wirelessness w/o a reboot.

Later, y'all....Jet
jetman
Mini Stumbler
 
Posts: 2
Joined: Mon Feb 21, 2005 7:12 pm

PreviousNext

Return to NetStumbler

Who is online

Users browsing this forum: No registered users and 3 guests