Not reading the included documentation ? Die here!

aireplay fake authentication

Postby henac » Tue Aug 16, 2005 1:35 am

Hi.

I'm running an authentication fake

aireplay -1 0 -e bla -a [mac_address_ap] -h 0:1:2:3:4:5 eth2

I get

>Sending Authentication Request
>Authentication successful

over and over again (without smiley!!!)

but aireplay -3 -h 0:1:2:3:4:5 -b [mac_address_ap] eth2

doesn't find ARP requests!! I do run this simultaneously, is it correct to do so?

I use a prism gt card for injection.

does somebody know whats wrong?
Hen
henac
Mini Stumbler
 
Posts: 7
Joined: Tue Aug 16, 2005 1:29 am

Do you need 2 cards for this ?

Postby browners » Wed Aug 24, 2005 10:33 am

Airodump capturing then airplay to generate more interesting packets. Can this be done similtainiously on the 1 card or do I need 2 ??

If just the 1 card does anyone know the procedure for it. ( sorta noob ) only got the one laptop now.
browners
Mini Stumbler
 
Posts: 11
Joined: Wed Aug 24, 2005 10:24 am

Aireplay doesnt produce packets on my wlan

Postby arosboro » Wed Aug 24, 2005 11:24 am

I have a prism 2.5 pci card on a gentoo system with the hostap drivers that have been patched according to the aircrack documentation.

When I try arp request generation I have to do a ping -f to winlaptop to get any arp packets. Then it begins to send packets however, no extra crypt packets seem to show up in kismet or airodump.

# aireplay -3 -b [myap] -h [winlaptop] wlan0
open(/dev/rtc) failed: No such device
Saving ARP requests in replay_arp-0824-111647.cap
You must also start airodump to capture replies.
Read 1528 packets (got 5 ARP requests), sent 11958 packets...

If I continue to ping flood or transfer files that's the only way I'm able to generate traffic.

# hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.1.1
STAID: id=0x001f v1.7.4 (station firmware)

Is there anything I missed that could be the reason for injection not working? I'm going to also mention that I have successfully used void11 to deauth some of my laptops, however it has to be in Master mode and I don't think I can monitor at the same time.

Thanks
arosboro
Mini Stumbler
 
Posts: 1
Joined: Wed Aug 24, 2005 10:56 am

Postby itsnotme » Wed Aug 24, 2005 11:27 am

Search.

This has been covered ad nauseum here on the forums.
User avatar
itsnotme
 
Posts: 1074
Joined: Wed Sep 04, 2002 10:19 pm
Location: Somewhere below Lake Ontario

Postby Dutch » Wed Aug 24, 2005 12:20 pm

arosboro wrote:I have a prism 2.5 pci card on a gentoo system with the hostap drivers that have been patched according to the aircrack documentation.

When I try arp request generation I have to do a ping -f to winlaptop to get any arp packets. Then it begins to send packets however, no extra crypt packets seem to show up in kismet or airodump.

# aireplay -3 -b [myap] -h [winlaptop] wlan0
open(/dev/rtc) failed: No such device
Saving ARP requests in replay_arp-0824-111647.cap
You must also start airodump to capture replies.
Read 1528 packets (got 5 ARP requests), sent 11958 packets...

If I continue to ping flood or transfer files that's the only way I'm able to generate traffic.

# hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.1.1
STAID: id=0x001f v1.7.4 (station firmware)

Is there anything I missed that could be the reason for injection not working? I'm going to also mention that I have successfully used void11 to deauth some of my laptops, however it has to be in Master mode and I don't think I can monitor at the same time.

Thanks

cd ~/aircrack-2.23 && cat README.txt|grep RTC
That should give you a clue.

Dutch
All your answers are belong to Google. SEARCH DAMMIT!
Warning. Warning.
Low C8H10N4O2 level detected. Operator halted....
User avatar
Dutch
 
Posts: 6698
Joined: Fri Mar 05, 2004 12:00 pm
Location: City of Mermaids, Denmark

simultaneous airplay and capture ????

Postby browners » Wed Aug 24, 2005 1:08 pm

Quick question Guys. I have been told i need 2 laptops to do this? Is this true ? Or do I just need 2 cards ? What i would really like is to be able to play packets to the AP and simultaneously collect IV's. any links or answers would be greatly appreciated :)
browners
Mini Stumbler
 
Posts: 11
Joined: Wed Aug 24, 2005 10:24 am

aireplay fake authentication

Postby paleck » Wed Aug 24, 2005 3:34 pm

Has anyone been able to suceesly run a fake authentication (attack 1) in aireplay useing the RTL8180 driver. If so could you please help me. Thanks.
paleck
Mini Stumbler
 
Posts: 15
Joined: Wed Jul 20, 2005 10:13 am

aireplay fake authentication

Postby paleck » Thu Aug 25, 2005 11:44 am

I am trying to run a fake authentication my test router but i have been unsuccefful in getting this to work. I have a Netgear WGT624v1 router and RLT8180 chipset wireless card. The routers SSID is test and the MAC adress is 00:09:5b:85:e3:88. I am running Aricrack 2.2. The command i am running is aireplay -1 0 -e test -a 00:09:5b:85:e3:88 -h 0:1:2:3:4:5 wlan0. Any help is apreciated.
-paleck
paleck
Mini Stumbler
 
Posts: 15
Joined: Wed Jul 20, 2005 10:13 am

Zyxel ZyAir G110

Postby pepps » Thu Sep 01, 2005 5:14 am

hi,i want to know if it's possible to use Netstumbler with my PCMCIA Card.
It's a Zyxel ZyAirG110.
I'm using it becasue I must to do my thesis about selfmade antenna and Nework auditing!
Can somebody help me please?
Many Thanks.
GP
pepps is online now Edit/Delete Message
pepps
Mini Stumbler
 
Posts: 4
Joined: Mon Jan 24, 2005 7:45 am

Postby wrzwaldo » Thu Sep 01, 2005 5:16 am

Cross posting douche!
wrzwaldo
 
Posts: 8995
Joined: Sun Dec 14, 2003 12:43 pm

Postby pepps » Thu Sep 01, 2005 5:29 am

I deleted my first post!!!
Help me please!
Tks.
GP
pepps
Mini Stumbler
 
Posts: 4
Joined: Mon Jan 24, 2005 7:45 am

Postby wrzwaldo » Thu Sep 01, 2005 5:39 am

pepps wrote:hi,i want to know if it's possible to use Netstumbler with my PCMCIA Card.
It's a Zyxel ZyAirG110.
I'm using it becasue I must to do my thesis about selfmade antenna and Nework auditing!
Can somebody help me please?
Many Thanks.
GP
pepps is online now Edit/Delete Message


And why do you need NetStumbler for that? Is you card listed/named in the README? Have any others gotten it to work? I would imagine you would need good noise data being this is for your "thesis" and all? The only card that provides that data reliably are the Hermes based cards.
wrzwaldo
 
Posts: 8995
Joined: Sun Dec 14, 2003 12:43 pm

Postby Dutch » Thu Sep 01, 2005 5:40 am

pepps wrote:I deleted my first post!!!
Help me please!
Tks.
GP

Here's some help : READ THE INCLUDED DOCUMENTATION. It will answer your question for you.

Binned.

Dutch
All your answers are belong to Google. SEARCH DAMMIT!
Warning. Warning.
Low C8H10N4O2 level detected. Operator halted....
User avatar
Dutch
 
Posts: 6698
Joined: Fri Mar 05, 2004 12:00 pm
Location: City of Mermaids, Denmark

Postby streaker69 » Thu Sep 01, 2005 5:42 am

pepps wrote:hi,i want to know if it's possible to use Netstumbler with my PCMCIA Card.
It's a Zyxel ZyAirG110.
I'm using it becasue I must to do my thesis about selfmade antenna and Nework auditing!
Can somebody help me please?
Many Thanks.
GP
pepps is online now Edit/Delete Message


Thesis huh? Do your own damn homework. If you cannot do enough research to even determine if that card works with NS, how the fuck do you expect to be able to complete a thesis about your subject matter.

Dickhead.
Treat your gun like your genitals, only whip it out when it's absolutely necessary.
User avatar
streaker69
 
Posts: 11867
Joined: Thu Jul 08, 2004 10:09 am
Location: Virginville, BlueBall, Bird In Hand, Intercourse, Paradise, PA

Zyxel ZyAir G 110

Postby pepps » Thu Sep 01, 2005 6:50 am

Hi,
I want to know if it's possible to use NetStumbler with my PCMCIA card Zyxel ZyAir G110.
I must to do a job on selfmade Antenna and I've this card.
Can somebody help me please?
Many Thanks.
GP
pepps
Mini Stumbler
 
Posts: 4
Joined: Mon Jan 24, 2005 7:45 am

PreviousNext

Return to Newbie Bin

Who is online

Users browsing this forum: No registered users and 2 guests