Page 1 of 11

POST YOUR SUCCESSFUL PRISM/XP Configurations here.

PostPosted: Mon Aug 19, 2002 12:35 pm
by blackwave
Originally posted by Thunderforge from thread [size=75]http://forums.netstumbler.com/showthread.php?s=&threadid=3352&pagenumber=2[/SIZE]
I just checked the new version with the Avaya CC-11b card (an Accton OEM) and it works fine. Under 'Device' in NS there are two options Prism 2 and NDIS 5.1 Using the Prism setting NS could only see the AP I was attached to. With the NDIS 5.1 setting it found all 3 APs it should have been able to find.

Yes I am running XP on this testing. So XP w/ NDIS 5.1 looks to be the way to enlightenment my young Prism learners.

PostPosted: Mon Aug 19, 2002 1:02 pm
by Thunderforge
Windows XP Home
Avaya CC-11b (Accton rebadge)
NDIS 5.1 setting (not Prism 2)

PostPosted: Mon Aug 19, 2002 1:21 pm
by danwatt
Compaq Presario 700 laptop, running Windows XP and a Linksys WPC11 (original version). No GPS, but the WPC11 works great!

PostPosted: Mon Aug 19, 2002 9:40 pm
by Trilobyte
Yes, finally!

Windows XP Pro and SMC 2632W v.1

BTW, the latest 1.32.1 drivers are required for NS operation.

One step closer... once MiniStumbler supports Prism CF cards, I will be a very happy man!

confirmation

PostPosted: Tue Aug 20, 2002 4:01 am
by c0rnholio
confirmed the following cards working with xp pro and ndis 5.1 as of 20.08.02 14:00 CEST:

Cisco Aironet 352 PCMCIA Firmware: v4.25.30

Acer Warplink 2411 (WS8-P)

cheers

PostPosted: Tue Aug 20, 2002 5:56 am
by Eitel
Woohoo!

The RageLan-DS 8430 works great And this card has a detachable antenna!

Thanks Marius!!

PostPosted: Tue Aug 20, 2002 9:41 am
by mellow
wpc11 ver 3 works like a charm with NDIS enabled.. now im trying to get both my wpc11 running in one instance of ns and my orinoco running at the same time in another instance so i can cover all the channels better

Netgar

PostPosted: Wed Aug 21, 2002 12:49 am
by SgtRock
It also works with my Netgear MA301/MA401 combo in my desktop at home, under XP Pro.

Sweet.

PostPosted: Wed Aug 21, 2002 1:32 pm
by Ai42
Ok since I don't have 2x PCMCIA slots I got the Linksys WUSB11 v2.6 (with the antenna) (USB for those of you that didn't notice). Works great but I get signifantly lower signal from the Linksys than my Dell TrueMobile 1150.

Anyway I'm going to tape this thing on top of my car and go wardriving tonight.

And for those of you intested dual instance of NS seams to work on both my TureMobile and Linksys USB. But the GPS won't work with them both just one.

PostPosted: Wed Aug 21, 2002 2:04 pm
by jizquierdo
Windows XP Pro
Linksys WUSB11 ver2.6 (USB Adapter)

works great...

i have to test my 3com Xjack WiFi card to see if it works.... lets hope it does

PostPosted: Thu Aug 22, 2002 1:33 pm
by megaman007
There have been two people so far who can confirm that the DWL-650 does work with netstumbler and XP!
Link to thread: http://forums.netstumbler.com/showthread.php?s=&threadid=3276

PostPosted: Thu Aug 22, 2002 2:21 pm
by Thunderforge
Originally posted by megaman007
There have been two people so far who can confirm that the DWL-650 does work with netstumbler and XP!
Link to thread: http://forums.netstumbler.com/showthread.php?s=&threadid=3276


Those were pre-0.3.30 release posts. It looks like it works under XP with the new NS now.

WHOOWHOOOO!!!!!!!!!!!!!!!!!!!!!!!!

PostPosted: Fri Aug 23, 2002 10:41 am
by CannonFotter
First of all THANK YOU MARIUS!!!!!!!!!!!!!!!!!!!!!!!!!

The Cisco support has been a GOD SEND!!!!!!!!! That has increased my range by almost a factor of 10!!!!!!!!


I have heard rumors that there would be 802.11a support. Has anyone been able to stumble with an 802.11a card, and if so what brand/model?

L8r Days & Waves.....

CannonFotter

WPC11 V3 and Dlink 560+

PostPosted: Fri Aug 23, 2002 5:28 pm
by stonent
I got a WPC11 V3 (prism3) working. But I took the card back for a Dlink 650+ which works but the graphing does not.
Note: this 650+ card is not a prism card. It is a TI ACX100 card that supports 22mbps when connected to another TIACX100 bases system. US Robotics has an identical card called the 2210.

When I say graphing wasn't working, it was just a solid purple bar at -90 and no red or green like my Prism3 card had. Image

PostPosted: Fri Aug 23, 2002 9:28 pm
by Aladdin_Sane
3.30 now seems to work with my Linksys wusb11 v2.5. I'm off to stumble through the neighbourhood now...show up as a "Instant Wireless USB Network Adapter ver.2.5 Prism 2" under device...I'm still thinking of getting the orinoco gold based on the ratings here...oh yeah, also running win2k server not xp...