Page 1 of 14

Cards that reportedly WORK with NetStumbler 0.4

PostPosted: Wed Apr 21, 2004 3:21 am
by Patje
The new released Netstumbler 0.4.0 and the 8470-WD are working together. Just did a 2 hours wardriving without any problem...

Patje

rtl8180L

PostPosted: Wed Apr 21, 2004 1:34 pm
by Whacko
dont know exactly where to put this, so ill put it here.

It seems the RTL8180L chip is working better with NS 0.4 (it had random crashes etc.) i havent done a wardrive with it yet, but it sure gives a lot of more info about my router. NS used to crash when i had "hide ssid beacon frame" broadcasting on, but its okay now. It also displays my router's vendor which i didnt know cos its rebranded.

only one minor thing the SSID name has L9D appended to it. so it shows:
"MyRoutersSSIDnameL9D" for instance. I dont know if this is a router thing or the card, so i will let you know tomorrow, when i take a little warPublicTransportationTrip (;)) to school. to see if it does it with all AP's it finds.

hope this is useful info. And keep up the good work Marius!


ok, i took my laptop to school today. It didnt crash anymore, and the "L9D" thing seems to be only with my router.. so imo i thinks its working fine

Linksys WPC54G With 0.4 Success

PostPosted: Wed Apr 21, 2004 2:18 pm
by Marcust99
I am very happy to report that my Linksys G card works perfectly with the new NetStumbler .4 version. MAJOR kudos to the author for getting this version out to work with the most popular cards!!

Marcus

New "Card" - Broadcom 54g - HP Laptop

PostPosted: Wed Apr 21, 2004 3:08 pm
by F`Nar
My laptop's internal WLAN NIC is finally not only supported, but supported well.

Anyone contemplating buying a HP zx5000 series notbook can at least be assured that Netstumbler will work on it.

Thank you, marius, not only for this, but for the display fix. Now I can finally watch my network get clobbered and have a chance of finding out what's clobbering it.

Now to see how ministumbler works on the iPAQ 55 with a Navman sleeve.

Intel 2100 mPCI, Orinoco Gold, Buffalo WLI-CB-G54

PostPosted: Wed Apr 21, 2004 4:37 pm
by odiferous
System: Inspiron 8600, Pentium M 1.4
Wireless: Intel 2100 mPCI, Orinoco Gold, Buffalo WLI-CB-G54

0.3.30: Intel crashed efficiently, Orinoco solid, Buffalo not tested

0.4: Intel misreports but does not crash, Orinoco and Buffalo solid

Marius, you do excellent work. Thanks for the new version. Elegant code, and well documented and supported by overly polite, eloquent people in these forums. I've only had to look up a few of the words I've found. ;~}

PostPosted: Wed Apr 21, 2004 4:44 pm
by Xeon
It works with my BinatoneBroadband WL1000 card - which has a D-Link 650 chipset (I'm using the D-Link drivers).

Thanks again, great tool now I can use it :)

PostPosted: Wed Apr 21, 2004 9:33 pm
by litehedded
sweet! it works with my intersil prism a/b/g card!
thanks man!

PostPosted: Thu Apr 22, 2004 5:37 am
by Local
Thank you, thank you for the new version.

My Dell Truemobile 1400 a/b/g mini-pci card works fine now, no more crashing every ten seconds. Thank you again.

SMC EliteConnect 2532W-B gave me problems one and a while but not anymore. This card is available at CompUSA and has two external RP-MMCX antenna connectors. Awsome card, lots of power, wouldn't trade it for anything. :D

SMC EliteConnect at COMPUSA

I also have a Buffalo Airstation WLI-CB-G54A b/g card I'll try today and let ya know.

PostPosted: Thu Apr 22, 2004 5:42 am
by Whacko
thought i'd post it here too:

http://www.Canyon-tech.com 's CN-WF502 card works too.
its a Realtek rtl8180L based card.

this card works

PostPosted: Thu Apr 22, 2004 7:45 am
by martinlesmana
Hi,

Used 3com airconnect : 3crwe737a-fr ... works fine with NS 0.4 so far....
BTW since I couldnt find an mmcx connector at all for the card (dont even think of a pigtail).... built my own froM parts of original antenna

joecool

PostPosted: Thu Apr 22, 2004 8:05 am
by clanggedin
WPC11 802.11b card works. Im even using ver.3 firmware (old).

PostPosted: Thu Apr 22, 2004 10:20 am
by surrealism
Netgear WG511 and WG511T both kicking strong.

PostPosted: Thu Apr 22, 2004 10:40 am
by Stealthy_C
Intel Pro/Wireless LAN 2100 Centrino

On Dell Inspiron 8600

PostPosted: Thu Apr 22, 2004 10:53 am
by Tripleplay905
My WCI-CB-G54A card works very well!

Acer 290 Travelmate Centrino Intel 2200B/G WinXPHome

PostPosted: Thu Apr 22, 2004 11:51 am
by netnet
Acer 290 Travelmate Centrino Intel 2200B/G WinXPHome is working fine with 0.4!

Thnx