Page 2 of 4

aireplay fake authentication

PostPosted: Tue Aug 16, 2005 1:35 am
by henac
Hi.

I'm running an authentication fake

aireplay -1 0 -e bla -a [mac_address_ap] -h 0:1:2:3:4:5 eth2

I get

>Sending Authentication Request
>Authentication successful

over and over again (without smiley!!!)

but aireplay -3 -h 0:1:2:3:4:5 -b [mac_address_ap] eth2

doesn't find ARP requests!! I do run this simultaneously, is it correct to do so?

I use a prism gt card for injection.

does somebody know whats wrong?
Hen

Do you need 2 cards for this ?

PostPosted: Wed Aug 24, 2005 10:33 am
by browners
Airodump capturing then airplay to generate more interesting packets. Can this be done similtainiously on the 1 card or do I need 2 ??

If just the 1 card does anyone know the procedure for it. ( sorta noob ) only got the one laptop now.

Aireplay doesnt produce packets on my wlan

PostPosted: Wed Aug 24, 2005 11:24 am
by arosboro
I have a prism 2.5 pci card on a gentoo system with the hostap drivers that have been patched according to the aircrack documentation.

When I try arp request generation I have to do a ping -f to winlaptop to get any arp packets. Then it begins to send packets however, no extra crypt packets seem to show up in kismet or airodump.

# aireplay -3 -b [myap] -h [winlaptop] wlan0
open(/dev/rtc) failed: No such device
Saving ARP requests in replay_arp-0824-111647.cap
You must also start airodump to capture replies.
Read 1528 packets (got 5 ARP requests), sent 11958 packets...

If I continue to ping flood or transfer files that's the only way I'm able to generate traffic.

# hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.1.1
STAID: id=0x001f v1.7.4 (station firmware)

Is there anything I missed that could be the reason for injection not working? I'm going to also mention that I have successfully used void11 to deauth some of my laptops, however it has to be in Master mode and I don't think I can monitor at the same time.

Thanks

PostPosted: Wed Aug 24, 2005 11:27 am
by itsnotme
Search.

This has been covered ad nauseum here on the forums.

PostPosted: Wed Aug 24, 2005 12:20 pm
by Dutch
arosboro wrote:I have a prism 2.5 pci card on a gentoo system with the hostap drivers that have been patched according to the aircrack documentation.

When I try arp request generation I have to do a ping -f to winlaptop to get any arp packets. Then it begins to send packets however, no extra crypt packets seem to show up in kismet or airodump.

# aireplay -3 -b [myap] -h [winlaptop] wlan0
open(/dev/rtc) failed: No such device
Saving ARP requests in replay_arp-0824-111647.cap
You must also start airodump to capture replies.
Read 1528 packets (got 5 ARP requests), sent 11958 packets...

If I continue to ping flood or transfer files that's the only way I'm able to generate traffic.

# hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.1.1
STAID: id=0x001f v1.7.4 (station firmware)

Is there anything I missed that could be the reason for injection not working? I'm going to also mention that I have successfully used void11 to deauth some of my laptops, however it has to be in Master mode and I don't think I can monitor at the same time.

Thanks

cd ~/aircrack-2.23 && cat README.txt|grep RTC
That should give you a clue.

Dutch

simultaneous airplay and capture ????

PostPosted: Wed Aug 24, 2005 1:08 pm
by browners
Quick question Guys. I have been told i need 2 laptops to do this? Is this true ? Or do I just need 2 cards ? What i would really like is to be able to play packets to the AP and simultaneously collect IV's. any links or answers would be greatly appreciated :)

aireplay fake authentication

PostPosted: Wed Aug 24, 2005 3:34 pm
by paleck
Has anyone been able to suceesly run a fake authentication (attack 1) in aireplay useing the RTL8180 driver. If so could you please help me. Thanks.

aireplay fake authentication

PostPosted: Thu Aug 25, 2005 11:44 am
by paleck
I am trying to run a fake authentication my test router but i have been unsuccefful in getting this to work. I have a Netgear WGT624v1 router and RLT8180 chipset wireless card. The routers SSID is test and the MAC adress is 00:09:5b:85:e3:88. I am running Aricrack 2.2. The command i am running is aireplay -1 0 -e test -a 00:09:5b:85:e3:88 -h 0:1:2:3:4:5 wlan0. Any help is apreciated.
-paleck

Zyxel ZyAir G110

PostPosted: Thu Sep 01, 2005 5:14 am
by pepps
hi,i want to know if it's possible to use Netstumbler with my PCMCIA Card.
It's a Zyxel ZyAirG110.
I'm using it becasue I must to do my thesis about selfmade antenna and Nework auditing!
Can somebody help me please?
Many Thanks.
GP
pepps is online now Edit/Delete Message

PostPosted: Thu Sep 01, 2005 5:16 am
by wrzwaldo
Cross posting douche!

PostPosted: Thu Sep 01, 2005 5:29 am
by pepps
I deleted my first post!!!
Help me please!
Tks.
GP

PostPosted: Thu Sep 01, 2005 5:39 am
by wrzwaldo
pepps wrote:hi,i want to know if it's possible to use Netstumbler with my PCMCIA Card.
It's a Zyxel ZyAirG110.
I'm using it becasue I must to do my thesis about selfmade antenna and Nework auditing!
Can somebody help me please?
Many Thanks.
GP
pepps is online now Edit/Delete Message


And why do you need NetStumbler for that? Is you card listed/named in the README? Have any others gotten it to work? I would imagine you would need good noise data being this is for your "thesis" and all? The only card that provides that data reliably are the Hermes based cards.

PostPosted: Thu Sep 01, 2005 5:40 am
by Dutch
pepps wrote:I deleted my first post!!!
Help me please!
Tks.
GP

Here's some help : READ THE INCLUDED DOCUMENTATION. It will answer your question for you.

Binned.

Dutch

PostPosted: Thu Sep 01, 2005 5:42 am
by streaker69
pepps wrote:hi,i want to know if it's possible to use Netstumbler with my PCMCIA Card.
It's a Zyxel ZyAirG110.
I'm using it becasue I must to do my thesis about selfmade antenna and Nework auditing!
Can somebody help me please?
Many Thanks.
GP
pepps is online now Edit/Delete Message


Thesis huh? Do your own damn homework. If you cannot do enough research to even determine if that card works with NS, how the fuck do you expect to be able to complete a thesis about your subject matter.

Dickhead.

Zyxel ZyAir G 110

PostPosted: Thu Sep 01, 2005 6:50 am
by pepps
Hi,
I want to know if it's possible to use NetStumbler with my PCMCIA card Zyxel ZyAir G110.
I must to do a job on selfmade Antenna and I've this card.
Can somebody help me please?
Many Thanks.
GP