FAQ: Default Access Point information

Post Default WAP info here!

Postby Torg » Fri Aug 23, 2002 5:48 pm

Dlink 713P

Default SSID is "Default"
Web administered.

Default passward: admin
Default IP address: 192.168.0.1 .

There are no default wep codes.
DHCP is turned on by default. Default range is 192.168.0.2-254

This page has some default informantion, too.
http://www.wi2600.org/mediawhore/nf0/wireless/ssid_defaults/ssid_defaults-1.0.5.txt
Torg
 
Posts: 28
Joined: Mon Jul 15, 2002 7:30 am
Location: Brewtown, Cheeseland

Orinoco RG-1000

Postby nox » Fri Aug 23, 2002 6:52 pm

I own a Orinoco RG-1000 heres the info:

ORINOCO RG-1000


Default key matches the last 5 characters of the Network Name printed on a label on the device. ( or Last 5 of the MAC Address )
SSID Name matches the last 6 characters of the MAC Address.


Valid values for 64-bit RC4 encryption

5-digit case-sensitive Alphanumeric Value.
Example: SECU1

10-digit Hexadecimal Value in the range of “a-f”, “A-F” and “0-9”.
Example: ABCD1234FE

Valid values for 128-bit RC4 encryption.

13-digit case-sensitive Alphanumeric Value.
Example: SECURITY12345

26-digit Hexadecimal Value in the range of “a-f”, “A-F” and “0-9”.
Example: ABCDEF1234567890FEDCBA4321

Included ia a TXT files to help you decypher your keys.


Reloading RG-1000 in case you forget your password

If these values cannot be provided/retrieved, it is impossible for you to update the Encryption Key and the Network Name. You will not be able to use the Residential Gateway Setup Utility to change it as well.

IN THIS CASE YOU NEED TO SOFT RELOAD IT TAKES ABOUT 5 MINS

Here's how (remotely of course)
Soft Reloading

If you used the AP Manager, instead of the Residential Gateway Setup Utility, the Residential Gateway configuration will be checked for unexpected settings. When detected, the Residential Gateway Setup Utility will set these settings back to default

Therefore, you have to Perform a Soft Reload.

The AP Manager program is a tool for LAN administrators or system supervisors to configure and monitor the performance of:


Force Reloading AP/RG

A Forced Reload, which you can perform with the AP Manager, allows you to recover from a situation where the Base Station:

O has stopped responding to the system
O has been configured with an incorrect IP address or
Encryption Key, or you have forgotten the unique identifiers to
access the Base Station.
O You have mislaid the Access Control password, or you would
like to disable Access Control


Forced Reload Configuration


Encryption No encryption (off)
Access Point IP Address 153.69.254.254

[IP Address note]
In environments with DHCP or BOOTP services, this address will be assigned automatically when the MAC Address of the unit was added to the IP Configuration table of the DHCP/BOOTP server system

Subnet Mask 255.255.255.0
Read Password 'public'
Read/Write Password 'public'
Attachments

[The extension txt has been deactivated and can no longer be displayed.]

nox
 

Postby alakahil » Fri Aug 23, 2002 6:56 pm

The RG1000 thing goes to AP1000 too. I would assume all orinoco AP/RG-s have this option.
Welcome to Hell. Here's your copy of Windows.
alakahil
Mini Stumbler
 
Posts: 3
Joined: Sun Apr 14, 2002 5:48 pm
Location: estonia

Default AP settings

Postby Facekhan » Fri Aug 23, 2002 11:30 pm

Dlink DI: 614+
Default:
DHCP on
WEP off
SSID "default"
Lan IP: 192..168.0.1
Username: Admin (cannot be changed)
Password: Admin


Linksys Wireless AP/Router BEFW11S4
DHCP on
WEP off
SSID "Linksys"
Lan Ip: 192.168.1.1
Username: (blank)
Password: Admin


There are also a couple more I know (siemens?, Lucent etc. ) but the info is on my other machine.

Here are some more

3Com Home Connect: Home Wireless Gateway
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
NAT: Enabled
Firewall: Enabled
DHCP Server: Enabled
Username: admin
Password: (blank)

In addition no password is required to access the status and index pages so you can find out vital info like wan ip and number of connected users without having the admin password.


Siemens SpeedStream

SPEEDSTREAM ROUTER
IP Address: 192.168.254.254
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
NAT: Enabled
Firewall: Enabled

Password: admin
Facekhan
Facekhan
Mini Stumbler
 
Posts: 8
Joined: Sun Aug 11, 2002 7:23 pm

Re: Default AP settings

Postby Psiphere » Tue Sep 03, 2002 7:18 pm

Originally posted by Facekhan
Dlink DI: 614+
Default:
DHCP on
WEP off
SSID "default"
Lan IP: 192..168.0.1
Username: Admin (cannot be changed)
Password: Admin


Got some extra info on this router. Not sure about all firmware versions but I know that version 2.0f has default values for hex WEP encoding at 128 bit

The 4 default keys are:

3175757A356539613061776874
34376168383973713338723337
62356E6E62326C376F76696835
77307774333461747730773736

and I believe the values are the same for the 64 bit except that the it use uses the first few characters of the above keys. Know what I mean?

Like the first one would be something like
3175757A35 (I can't remember the actual length of 64 bit hex ones)
Psiphere
Mini Stumbler
 
Posts: 14
Joined: Tue Aug 27, 2002 1:20 pm
Location: Ontario, Canada

Postby The Others » Wed Sep 04, 2002 11:58 am

Here's a giant list I pulled off the forum a while ago.

Also, netgear mr 314's have no default WEP, a default ip of 192.168.0.1

You can configure them via browsers or telnet, the password is by default is 1234

The web based management will need a password, the default being admin.

And that's all I know on them
Attachments

[The extension txt has been deactivated and can no longer be displayed.]

all good ends all

?u=273
User avatar
The Others
 
Posts: 2910
Joined: Mon Apr 22, 2002 7:27 am
Location: Dos Palabras, Mandoras

default info for 3 belkin routers/APs

Postby r_fugture » Tue Oct 14, 2003 10:22 am

Model #: F5D7230-4 (802.11G)
SSID: belkin54g
Encryption: disabled
IP address: 192.168.2.1
DHCP server: enabled
Channel: 11
Range: 192.168.2.2 - 192.168.2.100
NET: enabled
Firewall: enabled
Password: none, just hit the submit button.

Model #: F5D6231-4 (802.11B)
SSID: WLAN
Encryption: disabled
IP address: 192.168.2.1
DHCP server: enabled
Channel: 11
Range: 192.168.2.2 - 192.168.2.100
NET: enabled
Firewall: enabled
Password: none, just hit the submit button.

Model #: F5D5231-4
SSID: WLAN
Encryption: disabled
IP address: 192.168.2.1
DHCP server: enabled
Channel: 11
Range: 192.168.2.2 - 192.168.2.100
NET: enabled
Firewall: enabled
Password: none, just hit the submit button.
r_fugture
Mini Stumbler
 
Posts: 1
Joined: Tue Oct 14, 2003 9:41 am

Postby jamesbondsv » Thu Nov 06, 2003 2:01 pm

Netgear MR814 v2

The default username is admin and the password is password.

There is no default SSID because it is turned off by default.

DHCP is on at startup.

Default IP is 192.168.0.1.

Steve
Visit my own wireless community project at http://www.stevevance.net/wireless
jamesbondsv
 
Posts: 32
Joined: Tue Dec 10, 2002 10:10 am
Location: Batavia, IL


Return to WiFi

Who is online

Users browsing this forum: No registered users and 1 guest